Epson AcuLaser C2900N Service Manual page 390

Chapter 3 Removal and Replacement Procedures Revision B
20) Remove the BRACKET MCU R from
the printer.
Note: Release only the HARN ASSY
INTERLOCK from the GUIDE HARNESS
FSR to prevent the faulty wiring when it
assembles it.
21) Release the harness of the HARN
ASSY INTERLOCK (PL8.2.5) from the
GUIDE HARNESS FSR (PL8.2.2).
22) Release the hook of the GUIDE
HARNESS FSR, to release the boss and
tab of the GUIDE HARNESS FSR.
Remove the GUIDE HARNESS FSR from
the printer.
3 - 136 Confidential
Epson AcuLaser C2900N