Abus SECVEST Installer Manual page 39

Add/delete
Select the desired IP zone in the menu "Devices  IP Zones". Use the "Add/delete..." button to open the following
view where devices are integrated:
Name/function
Device Type
Trigger Mode
Trigger Events
Trigger Partitions
IP Address
HTTP Port Internal
RTSP Port Internal
HTTP Port External
RTSP Port External
User name
Password
Apply the settings with the "Submit" button.
Explanation
Camera TVIP41550
Internal
The camera starts recording as soon as the integrated PIR sensor is triggered.
External
The camera starts recording as soon as one of the defined trigger events occurs on
the alarm panel.
Int. + Ext.
The camera starts recording as soon as the integrated PIR sensor is triggered or
one of the defined trigger events occurs on the alarm panel.
(for "External" or "Int. + Ext." trigger mode only)
Events which cause the camera to start recording.
(for "External" or "Int. + Ext." trigger mode only)
Partitions to be monitored when trigger events occur.
IP address of the camera in the internal network
HTTP port of the camera in the internal network (default setting: "80")
RTSP port of the camera in the internal network (default setting: "554")
External HTTP port for which port forwarding in the router is configured
External RTSP port for which port forwarding in the router is configured
Default setting "Root"
–
Default setting no password assigned
Configuration
39