Abus SECVEST Installer Manual page 149

Function
ARC reporting
Speech Dialler
Meaning
ARC Reporting must be activated.
Installer Mode->Communications->ARC Reporting ->Call Mode ->Single
(or Alternate)
A list of the available connected transmission methods can be seen.
Ethernet
• When this is selected, the 2 possible configured recipients (IP Recipient 1, IP Recipient 2)
are displayed with their contact names.
• Scroll to the desired contact. Press the "Select" button.
• The alarm panel sends a test call to this recipient.
• The event (or trigger) "Test" is sent according to the set protocol.
PSTN
• When this is selected, the 2 possible configured recipients (Tel Recipient 1, Tel Recipient 2)
are displayed with their contact names.
• Scroll to the desired contact. Press the "Select" button.
• The alarm panel sends a test call to this recipient.
• The event (or trigger) "Test" is sent according to the set protocol.
GSM
• When this is selected, the 2 possible configured recipients (Tel Recipient 1, Tel Recipient 2)
are displayed with their contact names.
• Scroll to the desired contact. Press the "Select" button.
• The alarm panel sends a test call to this recipient.
• The event (or trigger) "Test" is sent according to the set protocol.
During the test call a series of progress messages appear on the display.
If the test call was not successful, the display shows a brief message with
the cause of the error.
Speech Dialler must be activated.
Installer Mode->Communications->Speech Dialler->Call Mode->Enabled
A list of the available connected transmission methods can be seen.
Ethernet
• When this is selected, enter a valid SIP User ID.
• e.g. +498207123456789@sipgate.de
• Press the "OK" button.
• The alarm panel establishes a connection. If the call is answered by this recipient,
the recipient hears the "Home Message" and "Message 1" to "Message 4".
PSTN
• When this is selected, enter a number to dial.
• Press the "OK" button.
• The alarm panel establishes a connection. If the call is answered by this recipient,
the recipient hears the "Home Message" and "Message 1" to "Message 4".
GSM
• When this is selected, enter a number to dial.
• Press the "OK" button.
• The alarm panel establishes a connection. If the call is answered by this recipient,
the recipient hears the "Home Message" and "Message 1" to "Message 4".
Configuration
149