Abus SECVEST Installer Manual page 68

Configuration
Type
PIR Set Latch
68
Explanation
This type requires the system or partition to have been
armed.
This output is deactivated when the system or partition is
disarmed or an alarm event occurs.
The output is activated for one second when either the
system is reset or installer mode is exited on the alarm
panel.
Note: if "Normal" polarity is selected, the output is
actuated with +12 V when activated and 0 V when
deactivated. Use the "Inverted" polarity to reverse the
function of this output.
Can be assigned
to partitions
Yes