Wireless Operation; Mounting Location Of The Alarm Panel - Abus SECVEST Installer Manual

Safety information

Wireless operation

Note
No wireless licence is required for Secvest and its
components.
The send/receive properties could be affected by
other signals (e.g. DECT telephones, WLAN).
The wireless devices in this system have been
tested by an independently accredited laboratory
for R&TTE certification.

Mounting location of the alarm panel

Note
The alarm panel should be positioned in a safe
place out of sight of possible intruders and easily
accessible to the operator.
The alarm panel should be mounted on a flat
surface in order to ensure that the back of the
device cannot be tampered with when the alarm
panel is mounted.
The alarm panel should be mounted at a
comfortable height (between 1.5 and 2 m).
10
Note
If small children are present, the alarm panel
should be mounted out of their reach.
Note
Position the alarm panel so that signal tones can be
heard even outside of the area being monitored.
The alarm panel should be positioned within a
monitored zone so that an unauthorised person
would have to enter a monitored area first before
gaining access to the panel when it is armed.
The alarm panel should be mounted near a socket
or power supply.
If a telephone dialler is used, the alarm panel must
be connected to a telephone connection.
The alarm panel should be mounted at least
1 metre away from metal objects (e.g. mirrors or
radiators).