Abus SECVEST Installer Manual page 142

Configuration
Name/function
Call-in
control
Rings to Answer
(only when "Call-in control"
is activated)
Answer on 1 ring
(only when "Call-in control"
is activated)
142
Explanation (checkbox)
Activated
When this option is activated, the user can call the alarm system remotely.
After the user has sent an access code to the wireless alarm panel in order to
identify themselves, they can send commands using the telephone keypad.
Deactivated
When this option is deactivated, the user can no longer call the alarm system
remotely.
Select when the wireless alarm panel answers a call.
• 3 rings
• 5 rings
• 7 rings
• 10 rings
• 15 rings
• 255 rings
Note
If the value is set to 255, the alarm panel never answers the call.
Activated
If the function is activated, the dial-in for remote configuration runs in stages.
The telephone dials the alarm system, rings twice and establishes the connection.
The alarm panel is activated by this call.
The wireless alarm panel answers the next call immediately, provided this call
occurs within 10 to 90 seconds. The "Rings to Answer" function is overridden in
this case.
Deactivated
If this function is deactivated, the "Rings to Answer" function takes over from the
first call.