Door Locks - Abus SECVEST Installer Manual

Door Locks

Name/function
Number
Name
Partitions
Adding door locks (alarm panel only)
1. Select Door Locks.
2. Select Add/Del Door Lock.
3. Select the corresponding door lock.
4. Trigger the tamper contact of the door lock or insert
a battery.
Note
When the door lock has been taught in, the
wireless alarm panel beeps twice to confirm.
A message appears on the display to confirm that
the door lock was added, and the value for the
received signal strength is shown.
5. Exit the entry with Back.
Explanation
The number comprises the component type (door lock) and a consecutive number.
Unique name of the door locks (e.g. Secvest Key or additional door lock).
Number of the partition to which the door lock is assigned.
Note
If a door lock has been taught in the symbol
appears next to the door lock number on the
alarm panel display.
6. Exit this display with Back.
Delete All (alarm panel only)
1. Select Delete All.
2. Confirm the selection with Next.
3. Confirm the security prompt with Yes to delete the
door locks or Back if you are not sure.
Configuration
57