Abus SECVEST Installer Manual page 150

Configuration
Function
Speech Dialler,
cont.
SMS
Email
150
Meaning
If "Call Acknowledge" is activated:
• The recipient can acknowledge and end the call with 5 or 9 if the following is set:
Installer Mode->Communications->Speech Dialler->Call Acknowledge->Enabled.
• During the test call a series of progress messages appear on the display.
• If the test call was not successful, the display shows a brief message with the cause of
the error.
SMS must be activated.
Installer Mode->Communications->SMS->Call Mode->Enabled
A list of the available connected transmission methods can be seen.
PSTN
• When this is selected, enter a number to dial.
• Press the "OK" button.
• The alarm panel sends an SMS to this number.
GSM
• When this is selected, enter a number to dial.
• Press the "OK" button.
• The alarm panel sends an SMS to this number.
• The recipient receives an SMS in the following form:
<Home Message>: 10:56 21/01/2015 SMS Test Call
• During the test call a series of progress messages appear on the display.
• If the test call was not successful, the display shows a brief message with
the cause of the error.
Email must be activated.
Installer Mode->Communications->Email->Call Mode->Enabled
• If this is selected, enter a valid email address.
• Press the "OK" button.
• The alarm panel sends an email to this address.
• The recipient receives an email in the following form:
Subject:
<Home Message>: Email Test Call
Text:
<Home Message>:
11:09 21/01/2015 Email Test Call
• During the test call a series of progress messages appear on the display.
• If the test call was not successful, the display shows a brief message with the cause of
the error.