Wam (Wireless Accessory Module) - Abus SECVEST Installer Manual

WAM (Wireless Accessory Module)

Name/function
Number
Name
Adding a wireless accessory module.
Note
Ensure that reserved outputs and zones are
assigned to each WAM.
See the table of reserved WAM outputs/zones
below.
Wireless Reserved
accessory outputs
module
WAM 1 229–232
225–228
WAM 2
221–224
WAM 3
217–220
WAM 4
213–216
WAM 5
209–212
WAM 6
WAM 7 205–208
WAM 8 201–204
Explanation
The number comprises the component type (WAM) and a consecutive number.
Unique name of the wireless accessory module
Reserved
Zones
248
247
246
245
244
243
242
241
Note
Configure the wireless accessory module as
describe in the WAM installation instructions,
e.g. as a wireless sender/receiver (function 3).
Once the wireless accessory module has been
configured as per the instructions, it can be added
to the system.
1. Select Add/Del WAM.
2. Select the corresponding wireless accessory module
(WAM). Up to eight wireless accessory modules can
be taught in.
3. Select, for example, WAM 1.
4. Trigger the tamper contact on the WAM.
Note
When WAM modules are taught in, the symbol
appears next to the WAM number.
Check the information of the wireless accessory
module.
Configuration
55