User Reset - Abus SECVEST Installer Manual

User reset

Name/function
Zone Alarms
Zone Tampers
Explanation (checkbox)
These menus determine the circumstances under which a user or installer
can reset the system after an alarm or after tampering.
Activated
Allows the user to reset this alarm triggered for zones or detectors.
Deactivated
User cannot perform a reset. The installer must reset the system after an alarm.
Activated
Allows the user to reset tamper alarms triggered for zones or detectors.
Deactivated
User cannot perform a reset. The installer must reset the system. This setting is
required for INCERT certification.
Configuration
95