Abus SECVEST Installer Manual page 96

Configuration
Name/function
System Tampers
96
Explanation (checkbox)
Activated
Allows the user to reset tamper alarms that affect the system.
Deactivated
User cannot perform a reset. The installer must reset the system.
This setting is required for INCERT certification.
System tampers can be caused by:
• Housing and wall tamper switches on the alarm panel
• Housing and wall tamper switches on control devices
• Tampering with connected wired sirens when the voltage at terminal TR is higher
than approx. 3 V
• Jamming or supervision when set to "Tamper"