Abus SECVEST Installer Manual page 45

Configuration
Note
The Soak Test function should only be set if a
detector tends to trigger false alarms.
This function works automatically. To test the
range of the detector, use the "walk test" function
and do not activate the soak test, as this function
stops the detector from triggering any alarms
when the wireless alarm system is armed and
only saves a message to the memory instead.
After 14 days the wireless alarm system resets
the zone and brings it back to normal operation.
Note
The Force Set Omit function must also still be
activated in menu System -> Security Settings
-> Force Set.
45