Creating, Editing, And Deleting Playlist Triggers; Creating A New Global Trigger; Editing Existing Global Trigger Settings; Deleting A Global Trigger - Christie 163-059105-XX User Manual

Creating, editing, and deleting playlist triggers

Playlist triggers are configured and managed through the GDC Integrated Media Block (IMB).
For more information, refer to the documentation provided with your IMB device.

Creating a new global trigger

Create a global trigger to trigger an output macro. For example, a fire alarm input signal could cause
playback to stop and the house lights to come on. A global trigger is always active and is not
dependent on specific playlist definitions.
1. In the left navigation menu, select Automation > Device Input Triggers.
2. Select + New Global Trigger.
3. Complete the Name, Source, and Trigger Event fields.
The Name field cannot contain spaces.
4. In the Macro Name list, select the macro that will run on trigger detection.
5. Select Add.

Editing existing global trigger settings

Edit the settings of an existing global trigger to change its behavior.
1. In the left navigation menu, select Automation > Device Input Triggers.
2. To the right of the global trigger you want to edit, select Edit
3. Edit the global trigger settings.
4. Select Save.

Deleting a global trigger

Delete a global trigger when it is no longer required.
1. In the left navigation menu, select Automation > Device Input Triggers.
2. To the right of the global trigger, select Delete
3. To confirm the deletion, select Delete.

Importing a device library

A device library contains commands used to control a specific device.
1. In the left navigation menu, select Automation > Device Libraries.
2. Select Import Device Library.
3. Browse to the location of the device library file.
4. Select the file and select Accept.
CineLife+ User Guide
020-103073-10 Rev. 1 (02-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
.
.
Automation
100