Deleting A Playlist Trigger; Creating A New Global Trigger; Editing Existing Global Trigger Settings; Deleting A Global Trigger - Christie CP2308-G User Manual

5. Tap Save.

Deleting a playlist trigger

Delete a playlist trigger when it is no longer required.
1. Tap Automation > Device Input Triggers.
2. Tap the Playlist Triggers tab.
3. To the right of the playlist trigger, tap Delete.
4. To confirm the deletion, tap Delete.

Creating a new global trigger

Create a global trigger to trigger an output macro. For example, a fire alarm input signal could cause
playback to stop and the house lights to come on. A global trigger is always active and is not
dependent on specific playlist definitions.
1. In the left navigation menu, tap Automation > Device Input Triggers.
2. Tap the Global Triggers tab.
3. Tap + New Global Trigger.
4. Complete the Name, Source, and Trigger Event fields.
5. In the Macro Name list, tap the macro that will run on trigger detection.
6. Tap Add.

Editing existing global trigger settings

Edit the settings of an existing global trigger to change its behavior.
1. In the left navigation menu, tap Automation > Device Input Triggers.
2. Tap the Global Triggers tab.
3. To the right of the global trigger you want to edit, tap Edit.
4. Edit the global trigger settings.
5. Tap Save.

Deleting a global trigger

Delete a global trigger when it is no longer required.
1. In the left navigation menu, tap Automation > Device Input Triggers.
2. Tap the Global Triggers tab.
3. To the right of the global trigger, tap Delete.
4. To confirm the deletion, tap Delete.
CP2308-G User Guide
020-102863-01 Rev. 1 (05-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Automation
78