Creating A New Playlist Trigger; Editing Existing Playlist Trigger Settings; Deleting A Playlist Trigger; Creating A New Global Trigger - Christie CP2309-RGB User Manual

Creating a new playlist trigger

Create new playlist triggers to activate an automation device in a playlist.
1. In the left navigation menu, select Automation > Device Input Triggers.
2. Select the Playlist Trigger tab.
3. Select + New Playlist Trigger.
4. Complete the Name, Device Source, and Resume Playback On fields.
The Name field cannot contain spaces.
5. Select Add.

Editing existing playlist trigger settings

Edit playlist trigger settings to change the playlist trigger behavior.
1. In the left navigation menu, select Automation > Device Input Triggers.
2. Select the Playlist Triggers tab.
3. To the right of the playlist trigger you want to edit, select Edit.
4. Edit the playlist trigger settings.
5. Select Save.

Deleting a playlist trigger

Delete a playlist trigger when it is no longer required.
1. Tap Automation > Device Input Triggers.
2. Tap the Playlist Triggers tab.
3. To the right of the playlist trigger, tap Delete.
4. To confirm the deletion, tap Delete.

Creating a new global trigger

Create a global trigger to trigger an output macro. For example, a fire alarm input signal could cause
playback to stop and the house lights to come on. A global trigger is always active and is not
dependent on specific playlist definitions.
1. In the left navigation menu, select Automation > Device Input Triggers.
2. Select the Global Triggers tab.
3. Select + New Global Trigger.
4. Complete the Name, Source, and Trigger Event fields.
The Name field cannot contain spaces.
5. In the Macro Name list, select the macro that will run on trigger detection.
6. Select Add.
CP2309-RGB User Guide
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Automation
81