Enabling The 12V Trigger - Christie HS 2K Series User Manual

6. To enable the signal from the HDBaseT Box, select HDBaseT.
7. To confirm the selection, select ENTER.

Enabling the 12V Trigger

The 12V trigger is used for electrical projector screens. The projector screen is automatically
lowered or raised when the projector is switched on or off.
1. Select Menu > Configuration > 12V Trigger.
2. To toggle, select ENTER.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring system settings
56