21s - 76
MANUAL-NV3550
EXTENSION HOUSING (Continued)
INSTALLATION
(1) Align bushing oil hole with oil slot in rear
housing.
(2) Tap bushing into place with Installer 6951 and
Handle C-4171.
(3) Install new oil seal in housing using Installer
C-3972-A (Fig. 133).
(4) Install propeller shaft with reference marks
aligned.
(5) Remove support and lower vehicle.
2001 JEEP WRANGLER
1 - HANDLE
2 - INSTALLER
(6) Check transmission fluid level.
Fig. 133 Rear Housing Seal
TJ