Download Print this page

Jeep Automobile Owner's Manual

Chrysler llc

Hide thumbs Also See for Automobile:

Owner's manual (478 pages)

,

Warranty information booklet (48 pages)

,

Service and warranty handbook (42 pages)

page of 440

/ 440
Contents
Table of Contents
Bookmarks

Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual and Warranty, Owner's Manual

SECTION

1

INTRODUCTION

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

4

UNDERSTANDING YOUR INSTRUMENT PANEL

5

STARTING AND OPERATING

6

WHAT TO DO IN EMERGENCIES

7

MAINTAINING YOUR VEHICLE

8

MAINTENANCE SCHEDULES

9

IF YOU NEED CONSUMER ASSISTANCE

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419

INDEX

TABLE OF CONTENTS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

PAGE

1

2

3

4

5

6

7

8

9

10

Table of Contents

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the Automobile and is the answer not in the manual?

Questions and answers

Summary of Contents for Jeep Automobile

Page 1: Introduction
TABLE OF CONTENTS SECTION PAGE ............. 3 INTRODUCTION .
Page 3: Table Of Contents
INTRODUCTION CONTENTS Introduction ......4 Warnings And Cautions ....7 Roll Over Warning .
Page 4: Introduction
4 INTRODUCTION INTRODUCTION Before you start to drive this vehicle, read this manual. Be Thank you for selecting a Jeep Commander and wel- sure you are familiar with all vehicle controls, particu- come to our worldwide family. larly those used for braking, steering and transmission and transfer case shifting.
Page 5: Roll Over Warning
INTRODUCTION 5 Roll Over Warning Utility vehicles have a significantly higher roll over rate than other types of vehicles. This vehicle has a higher ground clearance, higher center of gravity, and narrower track than many passenger cars. It is capable of perform- ing better in a wide variety of off-road applications.
Page 6 6 INTRODUCTION Failure to use driver and passenger seat belts provided NOTE: After you read the manual, it should be stored is a major cause of severe or fatal injury. In fact, the U.S. in the vehicle for convenient reference and remain with government notes that the universal use of existing seat the vehicle when sold so that the new owner will be belts could cut the highway death toll by 10,000 or more...
Page 7: Warnings And Cautions
INTRODUCTION 7 HOW TO USE THIS MANUAL WARNING! Consult the table of contents to determine which section contains the information you desire. Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals The detailed index, at the rear of the manual, contains a known to the State of California to cause cancer and complete listing of all subjects.
Page 8: Vehicle Identification Number
8 INTRODUCTION VEHICLE IDENTIFICATION NUMBER The vehicle identification number (VIN) is found on a label located on the left front corner of the instrument panel pad, visible from outside of the vehicle through the windshield. This number also appears on the Automobile Information Disclosure Label affixed to a window on your vehicle.
Page 9: Vehicle Modifications / Alterations
INTRODUCTION 9 VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....14 Doors And Door Locks ....18 Ignition Key .
Page 12 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Service ....24 Lap/Shoulder Belts .....33 Security Alarm System —...
Page 13: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Safety Tips ......69 Safety Checks You Should Make Outside The Vehicle .
Page 14: A Word About Your Keys
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your authorized dealer to give you the number.
Page 15: Key-In-Ignition Reminder
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 keys that have been programmed to the vehicle can be Key-In-Ignition Reminder If the driver’s door is opened when the key is in the used to start and operate the vehicle for longer than the ignition and not turned to the ON position, a chime will 2 second validation time period.
Page 16: Important Note About Service
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the SKIM indicator light comes on during normal Important Note About Service vehicle operation (it has been running for longer than 10 A four digit PIN number is needed to service the Sentry seconds) a fault has been detected in the electronics and Key Immobilizer System.
Page 17: Customer Key Programming
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 consists of programming a blank key to the vehicle will sound and the SKIM indicator light will begin to electronics. A blank key is one which has never been flash. Turn the ignition switch OFF and remove the programmed.
Page 18: Illuminated Entry
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. This device must accept any interference that may be WARNING! received, including interference that may cause undes- ired operation. For personal security, and safety in the event of an accident, lock the vehicle doors as you drive as well ILLUMINATED ENTRY as when you park and leave the vehicle.
Page 19 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Child Protection Locks The rear doors of your vehicle are equipped with child protection locks.
Page 20: Power Door Locks
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks If you press the door lock switch while the keys are in the A door lock switch is on each front door panel. Press this ignition switch, and the driver’s door is open, the doors switch to lock or unlock the doors.
Page 21: Remote Keyless Entry
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Automatic Unlock on Exit Feature — Only Available if Auto Lock is Enabled This feature will unlock all the doors when the driver’s door is opened if the vehicle is stopped and in P (Park) or N (Neutral).
Page 22: To Lock The Doors
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If desired, the system can be programmed to Customer Programmable Features of the “Electronic Ve- unlock all doors on the first press of the “Unlock” button. hicle Information Center (EVIC)” section or by following Refer to “Remote Unlock Driver’s Door 1st”...
Page 23: Using The Panic Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 NOTE: The interior lights will turn off when the ignition WARNING! is switched to the ACC or ON position after the panic alarm is activated. However, the exterior lights and horn Driving with the flipper glass open can allow poi- will remain on.
Page 24: General Information
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. While the “Unlock” button is pressed, (after 4 seconds) 2. Closeness to a radio transmitter such as a radio station press the “Lock” button. Release both buttons. tower, airport transmitter, and some mobile or CB radios. The “Flash Lights On Lock/Unlock”...
Page 25: Security Alarm System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 3. To reassemble the transmitter case, join the two halves of the case together. Install and tighten the screw until snug. Make sure there is an even “gap” between the two halves. Test transmitter operation. SECURITY ALARM SYSTEM —...
Page 26: To Set The Alarm
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Set the Alarm To Disarm the System The alarm will set when you use the remote keyless entry To disarm the system, use the remote keyless entry transmitter to lock the doors and liftgate or when you use transmitter.
Page 27: Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 LIFTGATE WARNING! To open the liftgate, pull up (squeeze) on the handle and lift. Manually unlocking the vehicle doors with the Driving with the liftgate open can allow poisonous plunger or a key in the lock cylinder will not unlock the exhaust gases into your vehicle.
Page 28: Liftgate Flipper Glass
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Liftgate Flipper Glass WARNING! The liftgate flipper glass is also unlocked when the liftgate is unlocked. To open the flipper glass, push up on To avoid injury stand back when opening. Glass will the window switch located on the liftgate.
Page 29: Power Windows
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 POWER WINDOWS The power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door/rear doors which operates the front passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACCESSORY position.
Page 30: Auto Down
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Down Auto Up Feature with Anti-Pinch Protection Both the driver and front passenger window switch has (Driver’s and Front Passenger Door Only) an “Auto Down” feature. Press the window switch past Lift the window switch to the second detent, release, and the first detent, release, and the window will go down the window will go up automatically.
Page 31: Window Lockout Switch
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the Auto-Up Feature Should the Auto-Up feature stop working the window probably needs to be reset.
Page 32: Occupant Restraints
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE open or partially open positions. This is a normal occur- Please pay close attention to the information in this rence and can be minimized. If the buffeting occurs with section. It tells you how to use your restraint system the sunroof open, adjust the sunroof opening to minimize properly to keep you and your passengers as safe as the buffeting.
Page 33: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Research has shown that seat belts save lives, and they WARNING! can reduce the seriousness of injuries in a collision. Some • Wearing a seat belt incorrectly is dangerous. Seat of the worst injuries happen when people are thrown from the vehicle.
Page 34: Lap/Shoulder Belt Operating Instructions
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click.” A belt that is buckled into the wrong buckle will not protect you properly.
Page 36 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your 5. Position the shoulder belt on your chest so that it is abdomen. To remove slack in the lap portion, pull up a comfortable and not resting on your neck.
Page 37: Adjustable Upper Shoulder Belt Anchorage
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 6. To release the belt, push the red button marked PRESS Adjustable Upper Shoulder Belt Anchorage on the buckle. The belt will automatically retract to its In the front seating positions, the shoulder belt can be stowed position.
Page 38: Automatic Locking Mode - If Equipped
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will 2. Grasp the shoulder portion and pull downward until prefer a lower position, and if you are taller than average, the entire belt is extracted. you’ll prefer a higher position.
Page 39: Seat Belt Pretensioners
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 This safety belt system has a retractor assembly that is Seat Belt Pretensioners designed to release webbing in a controlled manner. This The driver and front passenger seat belts are equipped feature is designed to help reduce the belt force acting on with a pretensioning device that is designed to remove the occupant’s chest.
Page 40: Enhanced Seat Belt Use Reminder System (Beltalert)
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System NOTE: The following steps must occur within the first (BeltAlert) 60 seconds of the ignition switch being turned to the ON If the driver or front passenger seat belt has not been or START position.
Page 41: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 The Enhanced Warning System (BeltAlert) can be reacti- Seat Belt Extender vated by repeating this procedure. If a seat belt is too short, even when fully extended and when the adjustable upper shoulder belt anchorage (if NOTE: Although the Enhanced Warning System equipped) is in its lowest position, your authorized...
Page 42: Driver And Front Passenger Supplemental Restraint Systems (Srs)
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver And Front Passenger Supplemental This vehicle has airbags for both the driver and right Restraint Systems (SRS) front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the steering wheel.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 This vehicle also is equipped with window bags to WARNING! protect the driver, front, and rear passengers sitting next • to a window. They are located above the side windows. Do not put anything on or around the front airbag Their covers are also labeled SRS/AIRBAG.
Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front airbags have a multi stage inflator design. This The window bag on the crash side of the vehicle is allows the airbag to have different rates of inflation that triggered in moderate to severe side collisions. In certain are based on collision severity.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Children that are not big enough to properly wear the 3. The driver and front passenger seats should be moved vehicle seat belt should be secured in the rear seat, in a back as far as practical to allow the front airbags room to child restraint or belt-positioning booster seat.
Page 46 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag System Components WARNING! The airbag system consists of the following: • Relying on the airbags alone could lead to more • Occupant Restraint Control Module severe injuries in a collision. The airbags work •...
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 • Driver and Front Passenger Seat Belt Pretensioner The ORC also monitors the readiness of the electronic parts of the system whenever the ignition switch is in • Occupant Classification System (OCS) — Front Pas- the START or ON positions.
Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Children 12 years and under should always ride WARNING! buckled up in a rear seat in an appropriate child restraint. Ignoring the “Airbag Warning Light” in your instru- • The Passenger Airbag Disable (PAD) Indicator Light ment panel could mean you won’t have the airbags (an amber light located in the center of the instrument to protect you in a collision.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 adult passenger is properly seated in the front passen- ger seat. In this case, the airbag is ready to be inflated if a collision requiring an airbag occurs. For almost all properly installed rear facing child re- straints, the “PAD Indicator Light”...
Page 50 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE will cause the system to turn the airbag on. In this case, Passenger Air- the OCS has classified the occupant of the seat as an Front Passenger bag Disable Airbag Status adult. An adult occupant needs to sit in a normal position Seat Occupant (PAD) Indicator (with their feet on or near the floor) in order to be...
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 because this can also affect occupant classification. Also, lodged under the seat and interferes with operation of if you fold down the rear seat check to be sure it doesn’t the weight sensors, a fault will occur which turns on both touch the front passenger seat.
Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Side Impact SRS Side Curtain Airbags are de- The driver front airbag gas is vented through the vent holes in the sides of the airbag. The passenger front signed to activate only in certain side or rollover airbag gas is vented through the vent holes in the sides collisions.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 • Do not use prior or future model year seat covers not The front passenger seat assembly contains critical com- ponents that affect the front passenger airbag deploy- designated for the specific model being repaired. Al- ment.
Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: A frontal collision that is not severe enough to WARNING! need airbag protection will not activate the system. This does not mean something is wrong with the airbag Unapproved modifications or service procedures to system.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 • As the airbags deflate you may see some smoke-like WARNING! particles. The particles are a normal by-product of the process that generates the nontoxic gas used for airbag Deployed airbags and seat belt pretensioners cannot inflation.
Page 56: Airbag Warning Light
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System Airbag Warning Light You will want to have the airbag system ready to inflate for your protection in an impact. The airbag system is WARNING! designed to be maintenance free. If any of the following •...
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 with other data gathered during a complete accident provided to the custodial entity upon request. General investigation, the electronic data may be used by data that does not identify particular vehicles or crashes DaimlerChrysler Corporation and others to learn more may be released for incorporation in aggregate crash about the possible causes of crashes and associated...
Page 58: Child Restraint
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Data Parameters that May Be Recorded: Child Restraint Everyone in your vehicle needs to be buckled up all the • Diagnostic trouble code(s) and warning lamp status time — babies and children, too. Every state in the United for electronically-controlled safety systems, including States and all Canadian provinces require that small the airbag system...
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 • The infant carrier is only used rearward-facing in the WARNING! vehicle. It is recommended for children who weigh up to about 20 lbs (9 kg). “Convertible” child seats often In a collision, an unrestrained child, even a tiny have a higher weight limit in the rearward-facing baby, can become a missile inside the vehicle.
Page 60 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Standards. The manufacturer also recommends that WARNING! you try a child restraint in the vehicle seats where you • Improper installation can lead to failure of an will use it before you buy it. infant or child restraint.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • If the belt still cannot be tightened, or if pulling and belt tight, however, any seat belt system will loosen with time, so check the belt occasionally and pull it pushing on the restraint loosens the belt, disconnect tight if necessary).
Page 62 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Older Children and Child Restraints Children Too Large for Booster Seats Children who weigh more than 20 lbs (9 kg) and who are Children who are large enough to wear the shoulder belt older than one year can ride forward-facing in the comfortably, and whose legs are long enough to bend vehicle.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 kits or retro-fit kits. You are urged to take advantage of all LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CH ildren) the available attachments provided with your child re- Your vehicle’s second row seat is equipped with the child straint in any vehicle.
Page 64 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The second row outboard seating positions have lower Installing the LATCH-Compatible Child Restraint anchorages that are capable of accommodating LATCH- System compatible child seats having flexible, webbing-mounted We urge that you carefully follow the directions of the lower attachments.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Latch Anchorages Tether Strap Mounting In addition, there are tether strap anchorages behind each Many, but not all restraint systems will be equipped with rear outboard seating position located on the back of the separate straps on each side, with each having a hook or seat.
Page 66 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE hook for attachment to the tether strap anchorage and a WARNING! means of adjusting the tension of the strap. Improper installation of a child restraint to the You will first loosen the adjusters on the lower straps and LATCH anchorages can lead to failure of an infant or on the tether strap so that you can more easily attach the child restraint.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 If the seat belt has a automatic locking retractor, it will to do something more. Disconnect the latch plate from have a distinctive label. Pull the belt from the retractor the buckle, turn the buckle around, and insert the latch until there is enough to allow you to pass through the plate into the buckle again.
Page 68: Engine Break-In Recommendations
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Route the tether strap over the seat back and attach the Transporting Pets hook to the tether anchor located on the back of the seat. Airbags deploying in the front seat could harm your pet. For the outboard seating positions, route the tether over An unrestrained pet will be thrown about and possibly the head rests, and attach the hook to the tether anchor...
Page 69: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 The engine oil installed in the engine at the factory is a SAFETY TIPS high quality energy conserving type lubricant. Oil Exhaust Gas changes should be consistent with anticipated climate conditions under which vehicle operations will occur. WARNING! The recommended viscosity and quality grades are shown in Section 7 of this manual.
Page 70: Safety Checks You Should Make Inside The Vehicle
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Do not inhale exhaust gases. They contain carbon Safety Checks You Should Make Inside The monoxide, a colorless and odorless gas which can kill. Vehicle Never run the engine in a closed area, such as a Seat Belts garage, and never sit in a parked vehicle with the Inspect the belt system periodically, checking for cuts,...
Page 71: Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Defrosters Lights Check operation by selecting the defrost mode and place Have someone observe the operation of all exterior lights the blower control on high speed. You should feel the air while you work the controls. Check turn signal and high directed against the windshield.
Page 73: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors .......78 Hands–Free Communication (UConnect™) — If Equipped .
Page 74 74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Seat Adjustment — Recline ..106 Easy Entry/Exit Seat ....118 Manual Lumbar Support Adjustment .
Page 75 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75 Lights-On Reminder ....125 TCS (Traction Control System) ... . 133 Fog Lights —...
Page 76 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Electronic Speed Control ....148 Erasing Homelink Buttons ....157 To Activate .
Page 77 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 Sunroof Fully Closed ....161 Cargo Load Floor ..... 166 Command-View™...
Page 78: Mirrors
78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror The mirror should be adjusted to center on the view through the rear window. A two-point pivot system allows for horizontal and vertical adjustment of the mirror. The mirror should be adjusted while set in the day position (toward windshield).
Page 79: Inside Automatic Dimming Mirror - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79 Inside Automatic Dimming Mirror — If Equipped CAUTION! This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn the feature To avoid damage to the mirror during cleaning, on or off by pressing the button at the base of the mirror.
Page 80: Exterior Mirrors Folding Feature
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Exterior Mirrors Folding Feature WARNING! All exterior mirrors are hinged and may be moved either forward or rearward to resist damage. The hinges have Vehicles and other objects seen in the right side three detent positions;...
Page 81: Power Remote Control Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 Power Remote Control Outside Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror, right mirror, or off position. After selecting a mirror move the knob in the same direction you want the mirror to move.
Page 82: Lighted Vanity Mirrors - If Equipped
82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lighted Vanity Mirrors — If Equipped Sun Visor Extension To access a lighted vanity mirror, flip down one of the This feature has a pull out extension on the sun visor for visors. increased coverage.
Page 83 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 UConnect™ allows you to transfer calls between the with the system at a time. The system is available in system and your cellular phone as you enter or exit your English, Spanish, or French languages (as equipped). vehicle, and enables you to mute the system’s micro- The rearview mirror contains the microphone for the phone for private conversation.
Page 84: Operations
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The UConnect™ system can be used with any Hands- Operations Free Profile certified Bluetooth™ cellular phone. See Voice commands can be used to operate the UConnect™ www.chrysler.com/uconnect for supported phones. If system and to navigate through the UConnect™ menu your cellular phone supports a different profile (e.g., structure.
Page 85 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 example, you can either use the combined form voice Cancel Command command Phonebook New Entry, or you can break At any prompt, after the voice on beep, you can say the combined form command into two voice com- Cancel and you will be returned to the main menu.
Page 86 Before attempting to pair phone, please see • www.dodge.com/uconnect your cellular phone’s user manual (Bluetooth section) • www.jeep.com/uconnect for instructions on how to complete this step. • For identification purposes, you will be prompted to The following are general phone to UConnect™ System pairing instructions: give the UConnect™...
Page 87 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 phones are present in the vehicle, the UConnect™ 234-567-890 is nine digits long, which is not a valid system will use the priority 3 cellular phone when you phone number - the closest valid phone number has make a call.
Page 88 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the Ready prompt and the following beep, say • When prompted, say the name of the new entry. Use of the name of the person you want to call. For example, long names helps the voice recognition and is recom- you can say John Doe, where John Doe is a previ- mended.
Page 89 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 four associated phone numbers and designations. Each After you are finished editing an entry in the phonebook, language has a separate 32 name phonebook accessible you will be given the opportunities to edit another entry only in that language.
Page 90 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the Phonebook Delete menu, you will Delete All Entries in the UConnect™ Phonebook then be asked for the name of the entry that you wish • Press the ’Phone’ button to begin. to delete.
Page 91: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 • To call one of the names in the list, press the Voice Answer or Reject an Incoming Call - No Call Recognition’ button during the playing of the desired Currently in Progress name and say Call.
Page 92 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Making a Second Call while Current Call in indicating that the active and hold status of the two calls Progress have switched. Only one call can be placed on hold at one To make a second call while you are currently in a call, time.
Page 93: Uconnect™ System Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 • After ignition key is switched off, a call can continue Call Termination To end a call in progress, momentarily press the Phone’ on the UConnect™ system either until the call ends or button.
Page 94 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the Ready prompt and the following beep, say If the phone is not reachable and the UConnect™ system the name of the language you wish to switch to is operational, you may reach the emergency number as (English, Espanol, or Francais, if so equipped).
Page 95 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Your phone must be turned on and paired to the UCon- Paging nect™ system to allow use of this vehicle feature in To learn how to page, refer to Working with Automated emergency situations when the cell phone has network Systems.
Page 96 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When calling a number with your UConnect™ system Turning Confirmation Prompts On/Off that normally requires you to enter in a touch-tone Turning confirmation prompts off will stop the system sequence on your cellular phone keypad, you can push from confirming your choices (e.g.
Page 97 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Dialing Using the Cellular Phone Keypad Mute/Un-mute (Mute off) You can dial a phone number with your cellular phone When you mute the UConnect™ system, you will still be keypad and still use the UConnect™ system (while able to hear the conversation coming from the other dialing via the cell phone keypad, the user must exercise party, but the other party will not be able to hear you.
Page 98: Advanced Phone Connectivity
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Information Service If you would like to connect or disconnect the Blue- When using AT&T Wireless Service, dialing to phone tooth™ connection between a UConnect™ paired cellular number #121, you can access voice activated automated phone and the UConnect™...
Page 99 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • The selected phone will be used for the next phone Select another Cellular Phone This feature allows you to select and start using another call. If the selected phone is not available, the UCon- phone with the UConnect™...
Page 100: Things You Should Know About Your Uconnect™ System
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, Things You Should Know About Your UConnect™ System • dry weather condition. Voice Recognition (VR) • Even though the system is designed for users speaking • Always wait for the beep before speaking. in North American English, French, and Spanish ac- cents, the system may not always work for some.
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • You can say O (letter O ) for 0 (zero). 800 must be • Performance, such as, audio clarity, echo. and loud- spoken eight-zero-zero. ness to a large degree, rely on the phone and network, and not the UConnect™...
Page 102 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103...
Page 104 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 105: Seats
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 SEATS North American English Primary Alternate(s) WARNING! Zero Add location Add new Adjusting a seat while the vehicle is moving is All of them dangerous. The sudden movement of the seat could Confirmation prompts Confirmations prompts cause you to lose control.
Page 106: Front Seat Adjustment - Recline
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Seat Adjustment — Recline WARNING! To adjust the seatback, lift the lever located on the • It is extremely dangerous to ride in a cargo area, outboard side of the seat, lean back, and release the lever at the desired position.
Page 107: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 button which must be pushed in to lower the head restraint to all positions. The restraints may be raised without pushing in the button. Manual Lumbar Control Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear.
Page 108: Way Driver's Power Seat
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 8 - Way Driver’s Power Seat 4 - Way Passenger’s Power Seat — If Equipped The driver’s power seat switches are located on the The front passenger’s power seat switches are located on outboard side of the driver’s seat lower side trim.
Page 109: 40/20/40 Second Row Folding Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 indicate the level of heat in use. Two LEDs are illumi- When high-temperature heating is selected, the heaters nated for high, one for low, and none for off. Pressing the provide a boosted heat level during the first five minutes switch once will select high-level heating.
Page 110 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Pull up on the seatback lever located on the outboard WARNING! side of the seat. Do not drive the vehicle with the outer second row NOTE: Also, pulling upward on this handle allows the seats in the tumbled position.
Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 NOTE: If sitting in the third row seat, pull rearward on the release strap located at the rear of the seat and tumble the seat forward. Fold and Tumble Seat Release Strap...
Page 112 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Middle Seatback (Second Row Seat) 1. Pull the release strap. Folding Center Seatback Center Seat Armrest (Second Row Seat) — If Equipped Release Strap The second row center seat may be equipped with a 2.
Page 113: 50/50 Third Row Folding Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 1. Open the tailgate. 2. Push the seatback release handle (toward rear of vehicle), and lower the seatback using the pull strap. Armrest (Second Row Seat) 50/50 Third Row Folding Seat To Lower Rear Seat Either side of the third row seat can be lowered to allow Seatback Release Handle for extended cargo space, and still maintain some rear...
Page 114: Driver Memory Seat - If Equipped
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Raise Rear Seat 4. Close the tailgate. 1. Open the tailgate. WARNING! 2. Detach pull strap from back of seat, and pull seatback upward until it locks into place. Reattach strap. The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion.
Page 115: Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Setting Memory Positions and Linking Remote Keyless Entry Transmitter to Memory NOTE: Each time the SET (S) button and a numbered button (1 or 2) are pressed, you erase the memory settings for that button and store a new one. 1.
Page 116: Memory Position Recall
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Turn on the radio and set the radio station presets (up 11. Select Remote Linked to Memory in the Electronic to 10 AM and 10 FM stations can be set). Vehicle Information Center (EVIC) and enter Yes or select Use Factory Settings from the EVIC and enter 6.
Page 117: To Disable A Transmitter Linked To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 To recall the memory settings for driver one, press To Disable A Transmitter Linked to Memory memory button number 1 on the driver’s door or the 1. Turn the ignition switch to the OFF position and “Unlock”...
Page 118: Easy Entry/Exit Seat
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Once programmed, all transmitters linked to approximately 2.5 inches (60 mm) when the key is memory can be easily enabled or disabled at one time. placed into the ignition and turned out of the LOCK Refer to Remote Linked to Memory under Electronic position.
Page 119: To Open And Close The Hood
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 NOTE: The Easy Entry Easy Exit feature is not enabled TO OPEN AND CLOSE THE HOOD when the vehicle is delivered from the factory. The Easy To open the hood, pull the release lever inside your Entry Easy Exit feature is enabled (or later disabled) vehicle located below the instrument panel and in front through the programmable features in the Electronic...
Page 120: Lights
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then, reach under the hood, move safety latch to the left, WARNING! and lift the hood. To prevent possible damage, do not slam the hood to close it. Use a firm downward push at If the hood is not fully latched, it could fly up when the center of the hood to ensure that both latches engage.
Page 121: Courtesy/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Courtesy/Reading Lights Each light can be turned on by pressing the recessed area of the lens. To turn these lights off, press the recessed area of the lens a second time. There are also reading lights located above the rear doors.
Page 122: Multi-Function Control Lever
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Multi-Function Control Lever Turn Signal Auto-Mode — If Equipped The multi-function control lever controls the operation of Tap the multi-function control lever once and the turn the headlights, turn signals, headlight beam selection, signal (left or right) will flash 3 times, and automatically instrument panel light dimming, passing light, interior turn off.
Page 123: Automatic Headlight System - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 This system performs two functions. With the engine running and the multi-function control lever in the A (Auto) position, the headlights will turn on and off based on the surrounding light levels. Headlights On Automatically With Wipers If your vehicle is equipped with Automatic Headlights it also has this customer programmable feature.
Page 124: Smartbeams - If Equipped
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: When your headlights come on during the To Activate daytime, the instrument panel lights will automatically 1. Select “Auto Headlamp Low/High Beams? — Low/ dim to the lower nighttime intensity. Refer to “Instru- High Beam.”...
Page 125: Instrument Panel And Interior Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 headlights to remain on longer (closer to the vehicle). “Off” position the instrument panel lighting is at the Also, dirt, film, and other obstructions (sticker, toll box, lowest light level and may not be suitable for night etc.) on the windshield or camera lens will cause the driving.
Page 126: Fog Lights - If Equipped
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fog Lights — If Equipped Turn Signals The fog light switch is located in the multi- Move the multi-function control lever up or down and function control lever. To activate the fog lights, the arrows on each side of the instrument cluster will turn on the park/turn lights, low beam headlights, flash to show proper operation of the front and rear turn...
Page 127: Headlight Time Delay
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Headlight Time Delay There is also a feature that delays turning off the vehicle lights for 30, 60, or 90 seconds after the ignition switch is turned OFF. To activate the headlight delay, the multi- function control lever must be rotated to the “Off”...
Page 128: Mist
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To use the washer, pull the lever toward you and hold Mist while spray is desired. If the lever is pulled while in the Use this feature when weather conditions make occa- delay range, the wiper will operate for several seconds sional usage of the wipers necessary.
Page 129: Rain Sensing Wipers-If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Rain Sensing Wipers—If Equipped This feature senses moisture on the windshield and automatically activates the wipers for the driver. The feature is especially useful for road splash or overspray from the windshield washers of the vehicle ahead. Rotate the end of the multi-function lever to one of five settings to activate this feature.
Page 130 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE driver desires more sensitivity. Place the wiper switch in The rain sensing system has protection features for the the OFF position when not using the system. wiper blades and arms, and will not operate under the following conditions: NOTE: •...
Page 131: Tilt Steering Column
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 TILT STEERING COLUMN WARNING! To tilt the column, push down on the lever below the turn signal control and move the wheel up or down, as Tilting the steering wheel column while the vehicle desired.
Page 132: Abs (Anti-Lock Brake System)
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ABS (Anti-Lock Brake System) WARNING! This system aids the driver in maintaining vehicle control ABS (Anti-Lock Brake System) cannot prevent the under adverse braking conditions. The system controls natural laws of physics from acting on the vehicle, hydraulic brake pressure to prevent wheel lock-up and nor can it increase the traction afforded by prevail- help avoid skidding on slippery surfaces during braking.
Page 133: Tcs (Traction Control System)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 TCS (Traction Control System) BAS (Brake Assist System) The BAS is designed to optimize the vehicle’s braking This system monitors the amount of wheel spin of each of capability during emergency braking maneuvers. The the driven wheels.
Page 134: Erm (Electronic Rollover Mitigation)
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ERM (Electronic Rollover Mitigation) WARNING! This system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the BAS (Brake Assist System) cannot prevent the natu- speed of the vehicle. When ERM determines that the rate ral laws of physics from acting on the vehicle, nor of change of the steering wheel angle and vehicles speed can it increase the traction afforded by prevailing...
Page 135: Esp (Electronic Stability Program)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 NOTE: Anytime the ESP system is in the “Full Off” ESP (Electronic Stability Program) mode, ERM is disabled. Refer to ESP (Electronic Stability This system enhances directional control and stability of Program) for a complete explanation of the available ESP the vehicle under various driving conditions.
Page 136 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Understeer - when the vehicle is turning less than WARNING! appropriate for the steering wheel position. ESP (Electronic Stability Program) cannot prevent The ESP/TCS Indicator Light located in the instrument the natural laws of physics from acting on the cluster, starts to flash as soon as the tires lose traction and vehicle, nor can it increase the traction afforded by the ESP system becomes active.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 or gravel conditions and more wheel spin than ESP High Range (4WD Models) or 2WD Models would normally allow is required to gain traction. To turn ESP on again, momentarily depress the ESP Control This is the normal operating mode for ESP in 4WD high Switch .
Page 138 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To improve the vehicle’s traction when driving Vehicle Information Center (EVIC). Refer to “Electronic with snow chains, or starting off in deep snow, sand, or Vehicle Information Center (EVIC)” in Section 4 of this gravel, it may be desirable to switch to the “Partial Off”...
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 30 mph (48 km/h). At 30 mph (48 km/h), the normal ESP WARNING! stability function returns but TCS remains off. When the vehicle speed drops below 25 mph (40 km/h), the ESP With the ESP switched off, the enhanced vehicle system shuts off.
Page 140: Esp/Bas Warning Lamp And Esp/Tcs Indicator Light
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Electronic Vehicle Information Center (EVIC). Refer to WARNING! “Electronic Vehicle Information Center (EVIC)” in Sec- tion 4 of this manual. (See page 186 for more informa- With the ESP switched off, the enhanced vehicle tion.) To turn ESP on again, momentarily depress the stability offered by ESP and ERM are unavailable.
Page 141: Rear Park Assist System- If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 If the “ESP/BAS Warning Lamp” comes on REAR PARK ASSIST SYSTEM— IF EQUIPPED continuously with the engine running, a mal- The Rear Park Assist System provides visual and audible function has been detected in either the ESP or indications of the distance between the rear fascia and the the BAS system, or both.
Page 142: Rear Park Assist Sensors
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Park Assist Sensors The four Rear Park Assist Sensors, located in the rear fascia, monitor the area behind the vehicle that is within the sensors’ field of view. The monitored area seems oval in shape.
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 When the obstacle is detected at a distance of about 59 When the detected obstacle is about 11.8 inches (30 cm) inches (150 cm) from the rear fascia, the outermost LEDs from the rear fascia, the warning display will actuate a of the warning display will be ON with increased bright- continuous tone for about 10 seconds, and it will turn ON ness.
Page 144: Enable/Disable The Rear Park Assist System
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Enable/Disable the Rear Park Assist System When the switch is pressed to disable the system, the The Rear Park Assist System can be enabled and disabled instrument cluster will display the PARK ASSIST DIS- with a switch located in the switch bank of the instru- ABLED message.
Page 145: Service The Rear Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Service the Rear Park Assist System CAUTION! When the Rear Park Assist System is defective, the instrument cluster will actuate a single chime, once per • The Rear Park Assist System is only a parking aid ignition cycle, and it will display the SERVICE PARK and it is unable to recognize every obstacle, in- ASSIST SYSTEM message.
Page 146 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Clean all four Rear Park Assist Sensors regularly, WARNING! taking care not to scratch or damage them. The sensors • must not be covered with ice, snow, slush, mud, dirt or Drivers must be careful when backing up even when using the Rear Park Assist System.
Page 147: Adjustable Pedals - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 ADJUSTABLE PEDALS — IF EQUIPPED This feature allows both the brake and accelerator pedals to move toward the driver to provide improved position with the steering wheel. The adjustable pedal system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position.
Page 148: Electronic Speed Control
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The pedals can be adjusted while driving. CAUTION! • The pedals cannot be adjusted when the vehicle is in R Do not place any article under the adjustable pedal’s (Reverse) or when the Speed Control is ON. A message or impede its ability to move as it may cause damage will be displayed in the Electronic Vehicle Information to the pedal controls.
Page 149: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 To Set at a Desired Speed When the vehicle has reached the desired speed, press and release the SET button. Release the accelerator and the vehicle will operate at the selected speed. To Deactivate A soft tap on the brake pedal, normal braking, or pressing the CANCEL button will deactivate the Speed Control without erasing the memory.
Page 150: To Vary The Speed Setting
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Vary the Speed Setting To Accelerate for Passing When the Speed Control is ON, speed can be increased Depress the accelerator as you would normally. When the by pressing and holding the RES·ACCEL button. When pedal is released, the vehicle will return to the set speed.
Page 151: Driving Up Or Down Hills
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 WARNING! WARNING! Leaving the Speed Control ON when not in use is To help keep your vehicle under control, do not use dangerous. You could accidentally set the system or Speed Control under these conditions: cause it to go faster than you want.
Page 152: Overhead Console - If Equipped
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE — IF EQUIPPED GARAGE DOOR OPENER — IF EQUIPPED The overhead console contains an optional universal The HomeLink Universal Transceiver replaces up to garage door opener (HomeLink ), storage for sunglasses, three remote controls (hand held transmitters) that oper- and optional power sunroof switches.
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! WARNING! A moving garage door can cause injury to people and Vehicle exhaust contains carbon monoxide, a danger- pets in the path of the door. People or pets could be ous gas. Do not run the vehicle’s exhaust while seriously or fatally injured.
Page 154: Programming Homelink
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink NOTE: When programming a garage door opener, it is advised to park outside the garage. It is also recom- mended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmis- sion of the radio-frequency signal.
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 NOTE: Some gate operators and garage door openers may require you to replace this Programming Step 3 with procedures noted in the Gate Operator/Canadian Pro- gramming section. 4. The EVIC display will show “CHANNEL X TRAIN- ING”...
Page 156 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To program the remaining two HomeLink but- 7. Firmly press and release the learn or smart button. tons, begin with Programming step two. Do not repeat (The name and color of the button may vary by manu- step one.
Page 157: Canadian Programming/Gate Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 display will show “CHANNEL X TRAINED” (where X is Canadian Programming/Gate Programming Canadian radio-frequency laws require transmitter sig- Channel 1, 2, or 3). Proceed with Programming step nals to time-out (or quit) after several seconds of four to complete.
Page 158: Reprogramming A Single Homelink Button
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press and hold the two outer HomeLink buttons and For questions or comments, contact HomeLink at: release only when the EVIC display shows “CHAN- www.homelink.com or 1-800-355-3515. NELS CLEARED” (after 20 seconds). Release both Security buttons.
Page 159: Power Sunroof - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 HomeLink is a trademark owned by Johnson Controls, WARNING! Inc. • Never leave children in a vehicle, with the keys in POWER SUNROOF — IF EQUIPPED the ignition switch. Occupants, particularly unat- The power sunroof switch is located on the overhead tended children, can become entrapped by the console.
Page 160: Opening Sunroof - Express
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof - Express sunroof will automatically retract. Remove the obstruc- Press the switch rearward and release, and the sunroof tion if this occurs. Next, press the switch forward and will open automatically from any position. The sunroof release to Express Close.
Page 161: Sunshade Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Sunshade Operation Sunroof Maintenance The sunshade can be opened manually. However, the Use only a non-abrasive cleaner and a soft cloth to clean sunshade will open automatically as the sunroof opens. the glass panel. NOTE: The sunshade cannot be closed if the sunroof is Ignition Off Operation open.
Page 162: Power Outlet
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Hold onto shade handle until shade is com- POWER OUTLET pletely open or closed. To the right of the convenience tray (lower center of instrument panel) is an outlet for electrically powered accessories.
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 The rear power outlet (if equipped) is located in the left The power outlets are a direct feed from the battery so rear cargo area. they receive power whether the ignition is in the ON or OFF position.
Page 164: Cup Holders
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUP HOLDERS CAUTION! Front Cup Holders Electrical Outlet Use With Engine Off In the center console, there are two cup holders for the • Many accessories that can be plugged in draw front seat passengers. power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 NOTE: The cup holder insert is removable, from the console, for cleaning. It can be reinstalled with the larger cup depression towards the passenger seat, but the top surface will not be flush with the console surface. Cup Holders (Second Row Seat) The second row seat has two cup holders in the center armrest.
Page 166: Cargo Area Features
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cup Holders (Third Row Seat) CARGO AREA FEATURES The third row seat passengers have cup holders on the Cargo Load Floor left and right rear trim panels. The panel in the load floor is reversible for added utility. One side is carpeted and the other side features a plastic lined tray which holds a variety of items.
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 2. Pull up on loop(s) and twist 90 degrees, so they are parallel to the slotted hole in tray. 3. Lift tray over loop(s), and reposition tray. Rear Storage Cover NOTE: The cargo load floor latches should not be used as cargo tie-downs.
Page 168: Rear Window Features
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Push loop(s) back down, so they are parallel to the top of the tray. REAR WINDOW FEATURES Rear Window Wiper/Washer A switch on the right side of the steering column controls operation of the rear wiper/washer function. Rotating the center of the switch up to the DEL (Delay) position or the ON position will activate the wiper.
Page 169: Roof Luggage Rack - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 the rear wiper switch or the ignition switch needs to be If not equipped, your authorized dealer can order and turned OFF and ON to restart the rear wiper. install Mopar cross rails built specifically for this roof rack system or a number of after market rails that are Adding Washer Fluid tailored to your life-style or activities.
Page 170 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If the rear cross rail (or any metallic object) is CAUTION! placed over the satellite radio antenna (if equipped), you may experience interruption of satellite radio reception. • To prevent damage to the roof of your vehicle, DO NOT For improved satellite radio reception, place the rear carry any loads on the roof rack without cross rails in- stalled.
Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 WARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the roof rack “Cautions” when carrying cargo on your roof rack.
Page 173: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel And Interior Controls ..176 Radio Broadcast Signals ....199 Instrument Cluster ..... . 177 Two Types Of Signals .
Page 174 174 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - Operating Instructions - Hands Free Phone — (CD Mode For CD Audio Play) ... 206 If Equipped ......222 Load/Eject Button Operating Instructions - Satellite Radio —...
Page 175 UNDERSTANDING YOUR INSTRUMENT PANEL 175 Selecting Satellite Mode In REF Radios ..227 CD/DVD Disc Maintenance ....231 Selecting Satellite Mode In RAQ Radios ..227 Radio Operation And Cellular Phones .
Page 176: Instrument Panel And Interior Controls
176 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL AND INTERIOR CONTROLS...
Page 177: Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 177 INSTRUMENT CLUSTER...
Page 178: Instrument Cluster Description
178 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTION 3. Turn Signal Indicator Light The arrow will flash with the exterior turn signal 1. Speedometer when the turn signal lever is operated. Indicates vehicle speed. If the vehicle electronics sense that the vehicle has 2.
Page 179 UNDERSTANDING YOUR INSTRUMENT PANEL 179 engine start. If the bulb does not come on when turning 6. Airbag Warning Light the key from OFF to ON, have the condition checked This light turns on and remains on for 6 to 8 promptly.
Page 180 180 UNDERSTANDING YOUR INSTRUMENT PANEL If the ABS light is on, the brake system should be serviced 10. Oil Pressure Warning Light as soon as possible to restore the benefits of Anti-Lock This light shows low engine oil pressure. The light brakes.
Page 181 UNDERSTANDING YOUR INSTRUMENT PANEL 181 prevailing road conditions. The “ESP/TCS Indicator As an added safety feature, your vehicle has been Light” will flash any time the ESP or TCS is active and equipped with a tire pressure monitoring system (TPMS) helping to improve vehicle stability.
Page 182 182 UNDERSTANDING YOUR INSTRUMENT PANEL 13. Temperature Gauge CAUTION! The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that Driving with a hot engine cooling system could the engine cooling system is operating satisfactorily. damage your vehicle.
Page 183 UNDERSTANDING YOUR INSTRUMENT PANEL 183 BAS warning light comes on continuously with the 14. Electronic Vehicle Information Center Display When the appropriate conditions exist, this display engine running, a malfunction has been detected in either shows the Electronic Vehicle Information Center (EVIC) the ESP or the BAS system.
Page 184 184 UNDERSTANDING YOUR INSTRUMENT PANEL or remain on continuously. Refer to Enhanced Driver 21. Transmission Range Indicator Seat Belt Reminder System (BeltAlert) in the Occupant This display indicator shows the automatic transmission Restraints section for more information. gear selection. 19. Cruise Indicator Light 22.
Page 185 UNDERSTANDING YOUR INSTRUMENT PANEL 185 when the engine is running, immediate service is re- 26. Low Fuel Warning Light quired and you may experience reduced performance, an When the fuel level reaches approximately 2.3 U.S. elevated/rough idle or engine stall and your vehicle may Gallons (8.7 Liters) this light will come on and require towing.
Page 186: Electronic Vehicle Information Center - If Equipped
186 UNDERSTANDING YOUR INSTRUMENT PANEL • TURN SIGNAL ON ELECTRONIC VEHICLE INFORMATION CENTER — IF EQUIPPED • PERFORM SERVICE • KEY NOT PROGRAMMED — DAMAGED KEY • KEY NOT PROGRAMMED — INVALID KEY • KEY NOT PROGRAMMED — EXCEEDED KEY PRO- GRAM LIMIT •...
Page 187 UNDERSTANDING YOUR INSTRUMENT PANEL 187 • LIFTGATE/DOOR OPEN (with graphic) • LIFTGLASS/HOOD OPEN (with graphic) • LIFTGATE/DOORS OPEN (with graphic) • WASHER FLUID LOW (with graphic) • LIFTGLASS OPEN (with graphic) • CHECK GAUGES • HOOD OPEN (with graphic) • AUTO HIGHBEAM ON •...
Page 188 188 UNDERSTANDING YOUR INSTRUMENT PANEL • CHECK GAS CAP • PEDAL ADJUST DISABLED — SHIFTER IN RE- VERSE • ESP OFF • SERVICE TIRE PRESS SYSTEM • MEMORY #1 POSITIONS SET • LEFT FRONT LOW PRESSURE (Premium TPM Sys- • MEMORY #2 POSITIONS SET tem Only) •...
Page 189: Customer Programmable Features
UNDERSTANDING YOUR INSTRUMENT PANEL 189 Customer Programmable Features Language? Press the MENU button until one of the display choices When in this display you may select one of three lan- guages for all display nomenclature, including the trip following appears: computer functions.
Page 190 190 UNDERSTANDING YOUR INSTRUMENT PANEL Display U.S. or Metric? Remote Unlock Driver’s Door 1st? Pressing the STEP button when in this display selects US When this feature is selected only the driver’s door will or Metric. The overhead console and instrument panel unlock on the first press of the remote keyless entry displays will be in the selected units.
Page 191 UNDERSTANDING YOUR INSTRUMENT PANEL 191 memory set position using the door mounted switch. Headlamp Delay Pressing the STEP button when in this display will select When this feature is selected the driver can choose, when “Yes” or “No.” exiting the vehicle, to have the headlamps remain on for 30, 60, or 90 seconds, or not remain on.
Page 192 192 UNDERSTANDING YOUR INSTRUMENT PANEL this display will select “Low Beam” or “Low/High Front Wipers Rain Sense? (Available with Rain Beam.” Refer to “Lights — SmartBeams” in Section 3 of Sensing Wipers Only) this manual. Pressing the STEP button when in this display will select “Manual”...
Page 193: Compass/Temperature/Trip Computer
UNDERSTANDING YOUR INSTRUMENT PANEL 193 Easy Entry/Exit Seat? (Available with Memory Seat Compass/Temperature/Trip Computer Only) This display provides the outside temperature, one of the This feature provides automatic driver’s seat positioning eight compass headings to indicate the direction the vehicle which will enhance driver mobility out of and into the is facing, and vehicle trip information.
Page 194 194 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! Even if the display still reads a few degrees above 32°F ( 0°C), the road surface may be icy, particularly in woods or on bridges. Drive carefully under such conditions to prevent an accident and possible per- sonal injury or property damage.
Page 195: Trip Computer
UNDERSTANDING YOUR INSTRUMENT PANEL 195 Trip Computer This feature, located in the instrument cluster, displays the following information when the display is in the “Compass/Temperature” mode and the STEP button is pressed: Step Button Press the STEP button to cycle through all of the Compass/Mini-Trip Computer displays.
Page 196 196 UNDERSTANDING YOUR INSTRUMENT PANEL Reset Button Average Fuel Economy Press the RESET button to reset the display you are in. Shows the average fuel economy since the last reset. Press and hold the RESET button (for 2 seconds) to reset When the fuel economy is reset, the display will read all of the displays.
Page 197 UNDERSTANDING YOUR INSTRUMENT PANEL 197 NOTE: Tires heat up during normal driving conditions. Elapsed Time Shows the accumulated ignition ON time since the last Heat will cause the tire pressure to increase from 2 to 6 reset. psi (14 to 41 kPa) during normal driving conditions. Refer to “Tire Inflation Pressures”...
Page 198 198 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: To ensure proper compass calibration, make sure the compass variance is properly set before manu- ally calibrating the compass. Refer to Variance Map. To Put Into a Calibration Mode Start the engine and leave the transmission in the P (Park) position.
Page 199: Radio General Information
UNDERSTANDING YOUR INSTRUMENT PANEL 199 To set the variance: Turn the ignition ON and set the display to “Compass/Temperature.” Press the C/T but- ton for approximately 5 seconds. The last variance zone number will be displayed. Press and hold the STEP button for 1 second to select the new variance zone and press the RESET button to resume normal operation.
Page 200: Two Types Of Signals
200 UNDERSTANDING YOUR INSTRUMENT PANEL Two Types of Signals FM Reception There are two basic types of radio signals... AM or Because FM transmission is based on frequency varia- Amplitude Modulation, in which the transmitted sound tions, interference that consists of amplitude variations causes the amplitude, or height, of the radio waves to can be filtered out, leaving the reception relatively clear, vary...
Page 201: Operating Instructions - Radio Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 201 Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the volume control to the right increases the volume and to the left decreases it.
Page 202 202 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button (Radio Mode) SCAN Button (Radio Mode) Press and release the SEEK button to search for the next Pressing the SCAN button causes the tuner to search for listenable station in either AM/FM or Satellite (if the next listenable station, in either AM, FM or Satellite (if equipped) mode.
Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL 203 2. Adjust the hours by turning the right side Tune / AM/FM Button (Radio Mode) Audio control. Press the button to select AM or FM Modes. 3. After the hours are adjusted, press the right side Tune Setting the Tone, Balance, and Fade / Audio control to set the minutes.
Page 204 204 UNDERSTANDING YOUR INSTRUMENT PANEL Press the rotary TUNE control a fifth time and FADE will Toggle the PTY button to select the following format display. Turn the TUNE control to the left or right to types: adjust the sound level between the front and rear speak- 16 Digit-Character Dis- Program Type ers.
Page 205 UNDERSTANDING YOUR INSTRUMENT PANEL 205 By pressing the SEEK button when the PTY icon is Nostalgia Nostalgia displayed, the radio will be tuned to the next frequency Oldies Oldies station with the same selected PTY name. The PTY Personality Personality function only operates when in the FM mode.
Page 206: Operation Instructions - (Cd Mode For Cd Audio Play)
206 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each push-button by Operation Instructions - (CD MODE for CD Audio repeating the above procedure with this exception: Press Play) the SET/DIR button twice and SET 2 will show in the NOTE: The ignition switch must be in the ON or ACC display window.
Page 207 UNDERSTANDING YOUR INSTRUMENT PANEL 207 SEEK Button (CD MODE for CD Audio Play) CAUTION! Press the right side of the SEEK button for the next selection on the CD. Press the left side of the button to This CD player will accept 4 3/4 inch (12 cm) discs return to the beginning of the current selection, or return only.
Page 208: Load/Eject Button (Cd Mode For Cd Audio Play)
208 UNDERSTANDING YOUR INSTRUMENT PANEL LOAD/EJECT Button (CD Mode for CD Audio Radio display will show EJECTING DISC when the disc Play) is being ejected and prompt the user to remove the disc. LOAD/ EJECT - Load Press and hold the LOAD/ EJT button for 5 seconds and Press the LOAD/ EJECT button and the push- all CDs will be ejected from the radio.
Page 209 UNDERSTANDING YOUR INSTRUMENT PANEL 209 TIME Button (CD MODE for CD Audio Play) RND/PTY Button (Random Play Button) (CD Press this button to change the display from a large CD MODE for CD Audio Play) playing time display to a small CD playing time display. Press this button while the CD is playing to activate Random Play.
Page 210: Notes On Playing Mp3 Files
210 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of files: 255 Notes On Playing MP3 Files The radio can play MP3 files, however, acceptable MP3 • Maximum number of folders: 100 file recording media and formats are limited. When • Maximum number of characters in file/folder names: writing MP3 files, pay attention to the following restric- tions.
Page 211 UNDERSTANDING YOUR INSTRUMENT PANEL 211 Supported MP3 File Formats MPEG Specifi- Sampling Fre- Bit rate (kbps) The radio will recognize only files with the *.mp3 exten- cation quency (kHz) sion as MP3 files. Non-MP3 files named with the *.mp3 320, 256, 224, extension may cause playback problems.
Page 212: Operation Instructions
212 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files Operation Instructions - (CD Mode for MP3 Audio When a medium containing MP3 data is loaded, the Play) radio checks all files on the medium. If the medium SEEK Button (CD Mode for MP3 Play) contains a lot of folders or files, the radio will take more Pressing the right side of the SEEK button plays the next time to start playing the MP3 files.
Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 213 LOAD / EJECT - Eject MSG or INFO Button (CD Mode for MP3 Play) Press the LOAD/ EJECT button and the push- Press and MSG or INFO button while playing MP3 disc. button with the corresponding number where The radio scrolls through the following TAG information: the CD was loaded and the disc will unload Song Title, Artist, File Name, and Folder Name (if avail-...
Page 214: Sales Code Ref - Am/Fm/Cd (Single Disc) Radio With Optional Satellite Radio And Hands Free Phone Capability
214 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button (CD Mode for MP3 Play) Operating Instructions - Satellite Radio Mode (If Switches back to Radio mode. Equipped) Refer to the Satellite Radio section of the Owner’s RND/ PTY Button (CD Mode for MP3 Play) Manual.
Page 215: Operating Instructions - Radio Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 215 Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the volume control to the right increases the volume and to the left decreases it.
Page 216 216 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button (Radio Mode) SCAN Button (Radio Mode) Press and release the SEEK button to search for the next Pressing the SCAN button causes the tuner to search for listenable station in either AM/FM or Satellite (if the next listenable station, in either AM, FM or Satellite (if equipped) mode.
Page 217 UNDERSTANDING YOUR INSTRUMENT PANEL 217 2. Adjust the hours by turning the right side Tune/ AM/FM Button (Radio Mode) Audio control. Press the button to select AM or FM Modes. 3. After the hours are adjusted, press the right side Setting the Tone, Balance, and Fade Tune/Audio control to set the minutes.
Page 218: Operation Instructions - Cd Mode
218 UNDERSTANDING YOUR INSTRUMENT PANEL Press the rotary TUNE control a fifth time and FADE will the SET button twice and SET 2 will show in the display be displayed. Turn the TUNE control to the left or right to window.
Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL 219 Inserting The Compact Disc (Single CD Player) SEEK Button (CD Mode) Gently insert one CD into the CD player with the CD Press the right side of the SEEK button for the next track label facing up. The CD will automatically be pulled into on the CD.
Page 220 220 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button (CD Mode) RND/SET Button (Random Play Button) (CD Press this button and the disc will unload and Mode) move to the entrance for easy removal. The Press this button while the CD is playing to activate unit will switch to the last selected mode.
Page 221: Operation Instructions - Auxiliary Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Operation Instructions - Auxiliary Mode MUTE Button (Auxiliary Mode) The auxiliary (AUX) jack is an audio input jack, which Press the MUTE button to cancel the sound from the allows the user to plug in a portable device such as an speakers.
Page 222: Operating Instructions - Hands Free Phone - If Equipped
222 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Operating Instructions - Satellite Radio — If Press this button to change the display from elapsed Equipped playing time to time of day. The time of day will be Refer to the Satellite Radio section of the Owner’s displayed for 5 seconds.
Page 223: Operating Instructions - Satellite Radio (If Equipped)
UNDERSTANDING YOUR INSTRUMENT PANEL 223 Satellite Navigation Radio with CD Player with MP3 Operating Instructions — Satellite Radio (If Capability (REC) - combines a Global-Positioning Equipped) System-based navigation system with an integrated color Refer to your “Navigation User’s Manual” for detailed screen to provide maps, turn identification, selection operating instructions.
Page 224: Video Entertainment System (Sales Code Xrv) - If Equipped
224 UNDERSTANDING YOUR INSTRUMENT PANEL VIDEO ENTERTAINMENT SYSTEM (SALES CODE XRV) — IF EQUIPPED The optional VES™ (Video Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-powered remote control, and two head- sets. The DVD player is mounted in the rear of the center console storage bin, and is concealed by a door that lifts up for access.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 225 The LCD screen is located on the headliner behind the front seats. Remote Control Location Lowering the Display Screen...
Page 226: Satellite Radio - If Equipped
226 UNDERSTANDING YOUR INSTRUMENT PANEL SATELLITE RADIO — IF EQUIPPED Electronic Serial Number/Sirius Identification Satellite radio uses direct satellite to receiver broadcast- Number (ESN/SID) ing technology to provide clear digital sound, coast to The Electronic Serial Number/Sirius Identification Num- coast. The subscription service provider is Sirius™ Satel- ber is needed to activate your Sirius Satellite Radio lite Radio.
Page 227: Selecting Satellite Mode In Ref Radios
UNDERSTANDING YOUR INSTRUMENT PANEL 227 first four digits are displayed. The radio will exit the Selecting Satellite Mode in RAQ Radios ESN/SID mode when any other button is pushed, the Press the MODE button repeatedly until the word ignition is turned OFF, or 5 minutes has passed since any SIRIUS appears in the display.
Page 228: Selecting A Channel
228 UNDERSTANDING YOUR INSTRUMENT PANEL Selecting a Channel Storing and Selecting Pre-Set Channels Press and release the SEEK or TUNE buttons to search for In addition to the 10 AM and 10 FM pre-set stations, you the next channel. Press the top of the button to search up may also commit 10 satellite stations to push button and the bottom of the button to search down.
Page 229: Pty Button Seek
UNDERSTANDING YOUR INSTRUMENT PANEL 229 NOTE: Pressing the SEEK or SCAN button while Reception Quality performing a music type scan will change the channel by Satellite reception may be interrupted due to one of the one and stop the search. Pressing a pre-set memory following reasons.
Page 230: Remote Sound System Controls - If Equipped
230 UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS — IF mode of the sound system. Pressing the top of the rocker EQUIPPED switch will increase the volume and pressing the bottom The remote sound system controls are located on the rear of the rocker switch will decrease the volume.
Page 231: Cd Player
UNDERSTANDING YOUR INSTRUMENT PANEL 231 The button located in the center of the left hand control CD/DVD DISC MAINTENANCE will tune to the next preset station that you have pro- To keep the CD/DVD discs in good condition, take the grammed in the radio preset push-button.
Page 232: Radio Operation And Cellular Phones
232 UNDERSTANDING YOUR INSTRUMENT PANEL RADIO OPERATION AND CELLULAR PHONES The instrument panel features four dual-vane airflow Under certain conditions, the cellular phone being On in registers. Two registers are located on the outer ends of your vehicle can cause erratic or noisy performance from the instrument panel and two are located in the center of your radio.
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 233 Press this button to turn on and off the air condi- CAUTION! tioning. Cool dehumidified air comes through the outlets selected by the mode selector. Press the To avoid damaging the electrical conductors of the button a second time to turn off the air conditioning.
Page 234 234 UNDERSTANDING YOUR INSTRUMENT PANEL Temperature Control directed to the front door windows through the side The temperature of air can be selected window demister grilles. Some airflow is delivered to the by rotating the center temperature floor while in defrost so that comfort can be maintained. control knob.
Page 235 UNDERSTANDING YOUR INSTRUMENT PANEL 235 in Recirculation mode air inside the vehicle is re-used. Bi-Level Air flows both through the outlets located in the Use this mode to rapidly cool the inside of the vehicle. instrument panel and those located on the floor. Air The Recirculation mode can also be used to temporarily flows through the registers in the back of the center block out outside odors, smoke, and dust.
Page 236: Operating Tips
236 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips...
Page 237: Automatic Temperature Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 237 Automatic Temperature Control — If Equipped The Infrared Dual-Zone Climate Control System auto- matically maintains the interior comfort level desired by the driver and passenger. This is accomplished by a dual sun-sensor in the top of the instrument panel, and an infrared sensor located in the face of the control unit.
Page 238 238 UNDERSTANDING YOUR INSTRUMENT PANEL LO AUTO position should be used for front seat occu- temperature out of the ducts will be full hot or full cold pants only. The HI AUTO position should be used when respectively. With the temperature setting in these posi- more air flow is desired, or when rear seat occupants are tions, the system does not attempt automatic comfort present.
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 239 certain conditions in automatic the system is blowing NOTE: • The surface of the climate control panel, and the top air out of the defrost vents. When these conditions are center of the instrument panel should be kept free of present and the Recirc button is pressed the indicator debris due to the climate control sensor’s location.
Page 240 240 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 241 NOTE: Regardless of the type of operation, when a NOTE: The defrost mode is not automatically selected. temperature knob is set to the full clockwise or full It must be manually selected, when desired. counterclockwise position, the system will deliver full •...
Page 242 242 UNDERSTANDING YOUR INSTRUMENT PANEL Air flows through the registers in the back of the Press this button to turn on the rear window center console, and under the front seats to the rear defroster and the heated side mirrors (if seat passengers.
Page 243: Rear Climate Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 243 This button can be used to block out smoke, Rear Climate Control — If Equipped odors, dust, high humidity, or if rapid cooling The Manual Rear Climate Control system has one floor is desired. The recirculation mode should only air outlet (passenger side), and two panel outlets in the be used temporarily.
Page 244 244 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Mode Control If rear heating/cooling is desired, press the “Rear On/Off Switch” (located in the upper switch bank above the controls) and select “Floor” “Bi-Level” or “Panel” from the Rear Control Panel (right knob located on the right rear quarter trim panel).
Page 245 UNDERSTANDING YOUR INSTRUMENT PANEL 245 • Bi-Level CAUTION! Air flows through both the outlets located in the rear quarter trim panels, and the one located on Interior air enters the Manual Rear Zone Climate the floor. The rear quarter trim panel outlets can be Control system through an intake grille located in closed to block airflow.
Page 246: Summer Operation
246 UNDERSTANDING YOUR INSTRUMENT PANEL • When the temperature knob is in the cold (Blue) Winter Operation position, cold air will be delivered from the outlets. As Use of the air Recirculation mode during winter months the temperature knob is turned towards the hot (Red) is not recommended because it may cause window position, the air will get warmer.
Page 247: Window Fogging
UNDERSTANDING YOUR INSTRUMENT PANEL 247 Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost, and windshield, is free of obstructions such as leaves. Leaves turning on the high blower.
Page 249: Starting And Operating
STARTING AND OPERATING CONTENTS Starting Procedures ..... 253 Rocking The Vehicle ....263 Normal Starting .
Page 250 250 STARTING AND OPERATING Anti-Lock Brake System ....271 Tire Markings ......281 Power Steering .
Page 251 STARTING AND OPERATING 251 Tire Pressure Monitor System (TPMS) ..297 Fuel System Cautions ....307 Base System .
Page 252 252 STARTING AND OPERATING Towing – 2WD Models ....323 Towing — Quadra–Trac II /Quadra–Drive II 4WD Models ......324 Towing —...
Page 253: Starting Procedures
STARTING AND OPERATING 253 STARTING PROCEDURES Normal Starting Before starting your vehicle, adjust your seat, adjust both Normal starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator inside and outside mirrors, and fasten your seat belts. pedal.
Page 254: Extreme Cold Weather (Below -20°F (-29°C)
254 STARTING AND OPERATING NOTE: To prevent damage to the starter, do not crank WARNING! the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again. Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start If the engine has been flooded, it may start to run, but not the vehicle.
Page 255: After Starting
STARTING AND OPERATING 255 The engine block heater cord is located: After Starting The idle speed will automatically decrease as the engine • 3.7L/4.7L Engine — coiled and strapped to the engine warms up. oil dipstick tube. • 5.7L Engine — bundled and fastened to the injector CAUTION! harness.
Page 256: Transmission Shifting
256 STARTING AND OPERATING TRANSMISSION SHIFTING 5–Speed Automatic Transmission The electronically controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle, may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles.
Page 257: Gear Ranges
STARTING AND OPERATING 257 Gear Ranges WARNING! NOTE: After selecting any gear range, wait a moment to It is dangerous to shift the selector lever out of P allow the selected gear to engage before accelerating. (Park) or N (Neutral) if the engine speed is higher This is especially important when the engine is cold.
Page 258 258 STARTING AND OPERATING N (Neutral) WARNING! No power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can roll Unintended movement of a vehicle could injure freely. Do not engage in N (Neutral) position while those in and near the vehicle.
Page 259 STARTING AND OPERATING 259 shifter is in the D (Drive) position, allowing the selection left “D(-)” and hold it there. The transmission will shift to of the desired top gear. For example, if the driver shifts the range from which the vehicle can best be slowed the transmission into 3 (third gear), the transmission will down.
Page 260 260 STARTING AND OPERATING NOTE: If the vehicle is started in extremely cold tem- OVER TEMP” message may display and the transmis- peratures, the transmission may not shift into Overdrive sion may downshift out of Overdrive until the transmis- and will automatically select the most desirable gear for sion cools down.
Page 261 STARTING AND OPERATING 261 overheating or failure due to excessive shifting. When activated. Pressing the switch a second time restores operating in “TOW/HAUL” mode, the transmission will normal operation. If the “TOW/HAUL” mode is desired, shift to 3rd gear and 4th will be enabled under steady the switch must be pressed each time the engine is cruise conditions.
Page 262 262 STARTING AND OPERATING 4. Wait approximately 10 seconds, then restart the en- during acceleration, the clutch automatically and gine. smoothly disengages. The feature is operational in Over- drive and in Drive. 5. Move the shift lever to the desired gear range. NOTE: The torque converter clutch will not engage If the problem is no longer detected, the transmission will until the transmission fluid and engine coolant are warm...
Page 263: Rocking The Vehicle
STARTING AND OPERATING 263 cause damage to the transmission. The torque converter selector in N (Neutral) for at least one minute after every will refill within five seconds of shifting from Park into five rocking-motion cycles. This will minimize overheat- any other gear position.
Page 264: Four-Wheel Drive Operation
264 STARTING AND OPERATING FOUR-WHEEL DRIVE OPERATION Quadra-Trac II Operating Instructions/Precautions — If Equipped Quadra-Trac I Operating The Quadra-Trac II transfer case is fully automatic in the Instructions/Precautions — If Equipped normal driving 4 HI mode. The Quadra-Trac II transfer The Quadra-Trac I is a single speed (HI range only) case provides three mode positions —...
Page 265: Shift Positions
STARTING AND OPERATING 265 road surfaces only. Driving in the 4 LOW position on dry WARNING! hard surfaced roads may cause increased tire wear and damage to driveline components. You or others could be injured if you leave the vehicle unattended with the transfer case in the N When operating your vehicle in 4 LOW, the engine speed (Neutral) position without first fully engaging the is approximately three times that of the 4 HI position at a...
Page 266: Shifting Procedures
266 STARTING AND OPERATING N (Neutral) Shifting Procedures Neutral — Disengages both the front and rear driveshafts 4 HI to 4 LOW from the powertrain. To be used for flat towing behind With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), another vehicle.
Page 267 STARTING AND OPERATING 267 LOW Indicator Lamp” in the instrument cluster will flash and go out when the shift is complete. Release the T-handle. NOTE: If shift conditions/interlocks are not met, or a transfer case motor temperature protection condition exists, a “CHECK SHIFT PROCEDURES” message will flash from the EVIC (Electronic Vehicle Information Cen- ter).
Page 268 268 STARTING AND OPERATING Neutral (N) Shift Procedure 1. Key ON, engine off. 2. Vehicle stopped, with foot on brake. 3. Place transmission in N (Neutral). 4. Hold down N (Neutral) “pin” switch (with a pen, etc.) for 4 seconds until the LED lamp by the switch starts to blink indicating shift in progress.
Page 269: Quadra-Drive Ii System - If Equipped
STARTING AND OPERATING 269 NOTE: If shift conditions/interlocks are not met, a the transfer case and axle couplings differ in design, their “CHECK SHIFT PROCEDURES” message will flash from operation is similar. Follow the Quadra-Trac II transfer the EVIC (Electronic Vehicle Information Center). Refer case shifting information, preceding this section, for to “Electronic Vehicle Information Center (EVIC)”...
Page 270 270 STARTING AND OPERATING NOTE: The instrument cluster “Brake Warning Light” Before leaving the vehicle parked on a hill, you must indicates only that the parking brake is applied. It does make sure the parking brake is fully applied and place not indicate the degree of brake application.
Page 271: Anti-Lock Brake System
STARTING AND OPERATING 271 Parking brake adjustment and maintenance NOTE: WARNING! should be performed by your authorized dealer. • Leaving children unattended in a vehicle is dan- ANTI-LOCK BRAKE SYSTEM gerous for a number of reasons. A child or others The Anti-Lock Brake System (ABS) is designed to aid the could be injured.
Page 272 272 STARTING AND OPERATING WARNING! WARNING! Significant over or under inflation of tires, or mixing Pumping of the Anti-Lock Brakes will diminish sizes of tires or wheels on the vehicle can lead to loss their effectiveness and may lead to an accident. of braking effectiveness.
Page 273 STARTING AND OPERATING 273 WARNING! CAUTION! • The Anti-Lock Brake System (ABS) cannot pre- The Anti-Lock Brake System is subject to possible vent the natural laws of physics from acting on the detrimental effects of electronic interference caused vehicle, nor can it increase braking or steering by improperly installed after-market radios or tele- efficiency beyond that afforded by the condition phones.
Page 274: Power Steering
274 STARTING AND OPERATING • Do not “ride” the brakes by resting your foot on the build up between the tire tread and the road. This pedal. This could overheat the brakes and result in hydroplaning action can cause loss of traction, braking unpredictable braking action, longer stopping dis- ability, and control.
Page 275: On-Road Driving Tips
STARTING AND OPERATING 275 NOTE: Increased noise levels at the end of the steering CAUTION! wheel travel are considered normal and does not indicate that there is a problem with the power steering system. Prolong operation of the steering system at the end of the steering wheel travel will increase the steering Upon initial start-up in cold weather, the power steering fluid temperature and should be avoided when...
Page 276: Off-Road Driving Tips
276 STARTING AND OPERATING conventional 2-wheel drive vehicles any more than low- Driving Through Water slung sports cars are designed to perform satisfactorily in Although your vehicle is capable of driving through off-road conditions. If at all possible, avoid sharp turns or water, there are a number of precautions that must be abrupt maneuvers.
Page 277: Driving In Snow, Mud And Sand
STARTING AND OPERATING 277 caution and maintain a steady controlled speed less than Maintenance 5 mph (8 km/h) in deep water to minimize wave effects. After driving through deep water, inspect your vehicle fluids and lubricants (engine oil, transmission oil, axle, Flowing Water transfer case) to assure the fluids have not been contami- If the water is swift flowing and rising (as in storm...
Page 278: Hill Climbing
278 STARTING AND OPERATING Hill Climbing WARNING! NOTE: Before attempting to climb a hill, determine the If the engine stalls or you lose headway or cannot conditions at the crest and/or on the other side. make it to the top of a steep hill or grade, never Before climbing a steep hill, shift the transmission to a attempt to turn around.
Page 279: Traction Downhill
STARTING AND OPERATING 279 • Completely inspect the underbody of your vehicle. Traction Downhill Shift the transmission into a low gear and the transfer Check tires, body structure, steering, suspension, and case to 4WD LOW range. Let the vehicle go slowly down exhaust system for damage.
Page 280: Multi Displacement System (Mds) - 5.7L Engine Only
280 STARTING AND OPERATING MULTI DISPLACEMENT SYSTEM (MDS) - 5.7L WARNING! Engine Only This feature offers improved fuel economy by shutting Abrasive material in any part of the brakes may off four of the engine’s eight cylinders during light load cause excessive wear or unpredictable braking.
Page 281: Tire Safety Information
STARTING AND OPERATING 281 • European Metric tire sizing is based on European TIRE SAFETY INFORMATION design standards. Tires designed to this standard have Tire Markings the tire size molded into the sidewall beginning with the section width. The letter P is absent from this tire size designation.
Page 282 282 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm)
Page 283 STARTING AND OPERATING 283 EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Page 284: Tire Identification Number (Tin)
284 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire tires as mounted on the vehicle. If the TIN is not found on however the date code may only be on one side.
Page 285: Tire Loading And Tire Pressure
STARTING AND OPERATING 285 Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. Tire and Loading Information This placard tells you important information about the:...
Page 286 286 STARTING AND OPERATING To determine the maximum loading conditions of your 3) the tire size designed for your vehicle vehicle, locate the statement “The combined weight of 4) the cold tire inflation pressures for the front, rear occupants and cargo should never exceed XXX kg or XXX and spare tires.
Page 287 STARTING AND OPERATING 287 4. The resulting figure equals the available amount of 6. If your vehicle will be towing a trailer, load from your cargo and luggage load capacity. For example, if “XXX” trailer will be transferred to your vehicle. Consult this amount equals 1400 lbs.
Page 288 288 STARTING AND OPERATING...
Page 289: Tires - General Information
STARTING AND OPERATING 289 1. Safety— WARNING! Overloading of your tires is dangerous. Overloading WARNING! can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the Improperly inflated tires are dangerous and can cause accidents. recommended load capacity for your vehicle.
Page 290: Tire Inflation Pressures
290 STARTING AND OPERATING 2. Economy— Tire Inflation Pressures Improper inflation pressures can cause uneven wear The proper cold tire inflation pressure is listed on either patterns to develop across the tire tread. These abnormal the face of the driver’s door, or the driver’s side “B” pillar. wear patterns will reduce tread life resulting in a need for earlier tire replacement.
Page 291 STARTING AND OPERATING 291 check tire pressure. Do not make a visual judgement Check tire pressures more often if subject to a wide range when determining proper inflation. Radial tires may look of outdoor temperatures, as tire pressures vary with properly inflated even when they are under inflated.
Page 292: Tire Pressures For High Speed Operation
292 STARTING AND OPERATING Tire Pressures for High Speed Operation WARNING! The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- High speed driving with your vehicle under maxi- tions are such that the vehicle can be driven at high mum load is dangerous.
Page 293: Radial-Ply Tires
STARTING AND OPERATING 293 Radial-Ply Tires Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 35 mph (55 km/h). WARNING! Combining radial ply tires with other types of tires WARNING! on your vehicle will cause your vehicle to handle poorly.
Page 294: Tread Wear Indicators
294 STARTING AND OPERATING Tread Wear Indicators These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves and will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 inch (2 mm).
Page 295: Replacement Tires
STARTING AND OPERATING 295 Replacement Tires WARNING! The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for Tires and spare tire should be replaced after six wear and correct cold tire inflation pressure. The manu- years, regardless of the remaining tread.
Page 296: Alignment And Balance
296 STARTING AND OPERATING WARNING! CAUTION! • Do not use a tire, wheel size or rating other than Replacing original tires with tires of a different size that specified for your vehicle. Some combina- may result in false speedometer and odometer read- tions of unapproved tires and wheels may change ings.
Page 297: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 297 Improper alignment will not cause vehicle vibration. tire pressures is low. The “Tire Pressure Monitoring Vibration may be a result of tire and wheel out-of- Telltale Light” will flash on and off for 10 to 60 seconds balance.
Page 298 298 STARTING AND OPERATING NOTE: For vehicles with optional wheel/tire sizes and CAUTION! significantly different tire placard pressures, the placard pressure value and the low-pressure threshold value is The TPMS has been optimized for the original re-programmable at your authorized dealer to accommo- equipment tires and wheels.
Page 299: Premium System
STARTING AND OPERATING 299 Premium System CAUTION! The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to After inspecting or adjusting the tire pressure al- monitor tire pressure levels. Sensors mounted to each ways reinstall the valve stem cap. This will prevent wheel as part of the valve stem transmit tire pressure moisture and dirt from entering the valve stem, readings to the Receiver Module.
Page 300 300 STARTING AND OPERATING when a system fault is detected. The flash cycle will various Tire Pressure Monitoring System Display Mes- repeat every ten minutes or until the fault condition is sages in the EVIC, and a “Tire Pressure Monitoring removed and reset.
Page 301 STARTING AND OPERATING 301 Telltale Light” will illuminate continuously (solid) and Inspect all tires for proper inflation pressure, once the shall remain illuminated until the warning condition is proper tire pressure has been set, the TPMS will reset removed/reset. automatically when the vehicle has been driven for at least 2 minutes at or above 15 mph (24 km/h).
Page 302 302 STARTING AND OPERATING CAUTION! CAUTION! The TPMS has been optimized for the original After inspecting or adjusting the tire pressure al- equipment tires and wheels. TPMS pressures have ways reinstall the valve stem cap. This will prevent been established for the tire size equipped on your moisture and dirt from entering the valve stem, vehicle.
Page 303: General Information
STARTING AND OPERATING 303 General Information TIRE CHAINS This device complies with part 15 of the FCC rules and Certain models have sufficient tire-to-body clearance to RSS 210 of Industry Canada. Operation is subject to the allow use of tire chains. Install chains on rear tires only. following conditions: Follow these recommendations to guard against damage and excessive tire and chain wear:...
Page 304: Tire Rotation Recommendations
304 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS NOTE: The Premium Tire Pressure Monitor System will Tires on the front and rear axles of vehicles operate at automatically locate the pressure values displayed in the different loads and perform different steering, handling, correct vehicle position following a tire rotation.
Page 305: Fuel Requirements
STARTING AND OPERATING 305 using high quality unleaded gasoline having an octane FUEL REQUIREMENTS range of 87 to 89. The manufacturer recommends the use 3.7/4.7L Engines (If Equipped) of 89 octane for optimum performance. The use of All engines (except 5.7L engines) are de- premium gasoline is not recommended.
Page 306: Reformulated Gasoline
306 STARTING AND OPERATING Over 40 auto manufacturer’s world wide have issued and Gasoline/Oxygenate Blends endorsed consistent gasoline specifications (the World- Some fuel suppliers blend unleaded gasoline with oxy- wide Fuel Charter, WWFC) to define fuel properties genates such as 10% ethanol, MTBE, and ETBE. Oxygen- necessary to deliver enhanced emissions, performance, ates are required in some areas of the country during the and durability for your vehicle.
Page 307: Mmt In Gasoline
STARTING AND OPERATING 307 MMT In Gasoline Materials Added To Fuel MMT is a manganese containing metallic additive that is All gasoline sold in the United States is required to blended into some gasoline to increase octane. Gasoline contain effective detergent additives. Use of additional blended with MMT provides no performance advantage detergents or other additives is not needed under normal beyond gasoline of the same octane number without...
Page 308: Carbon Monoxide Warnings
308 STARTING AND OPERATING • An out-of-tune engine, or certain fuel or ignition Carbon Monoxide Warnings malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or WARNING! some light smoke, your engine may be out of tune or malfunctioning and may require immediate service.
Page 309: Fuel Tank Filler Cap (Gas Cap)
STARTING AND OPERATING 309 • Guard against carbon monoxide with proper mainte- FUEL TANK FILLER CAP (GAS CAP) nance. Have the exhaust system inspected every time The fuel cap is located on the left side of the vehicle. If the the vehicle is raised.
Page 310 310 STARTING AND OPERATING • To replace the cap, insert it into the filler neck and CAUTION! tighten the cap about 1/4 turn until you hear one click. This is an indication that the cap is properly tightened. Damage to the fuel system or emission control system could result from using an improper fuel cap •...
Page 311: Loose Fuel Filler Cap Message
STARTING AND OPERATING 311 Loose Fuel Filler Cap Message WARNING! If the vehicle diagnostic system determines that the fuel • Remove the fuel cap (gas cap) slowly to prevent filler cap is loose, improperly installed, or damaged, a “CHECK GAS CAP” message will be displayed in the fuel spray from the filler neck which may cause EVIC (Electronic Vehicle Information Center).
Page 312: Trailer Towing
312 STARTING AND OPERATING Common Towing Definitions WARNING! The following trailer towing related definitions will assist you in understanding the following information: A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You Gross Vehicle Weight Rating (GVWR) could be burned.
Page 313 STARTING AND OPERATING 313 Gross Combination Weight Rating (GCWR) Tongue Weight (TW) The gross combination weight rating (GCWR) is the total The downward force exerted on the hitch ball by the permissible weight of your vehicle and trailer when trailer. In most cases it should not be less than 10% or weighed in combination.
Page 314: Trailer Hitch Classification
314 STARTING AND OPERATING hitches are the most popular on the market today and tow and should be used to assist you in selecting the they’re commonly used to tow small- and medium-sized correct trailer hitch for your intended towing condition. trailers.
Page 315: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 315 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ Model GVWR (Gross Ve- GCWR (Gross Com- Frontal Area Max. GTW (Gross Max. Tongue Wt. Transmission hicle Wt.
Page 316: Trailer And Tongue Weight
316 STARTING AND OPERATING Note 1 – The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to the Tire– Safety Information Section in this manual.
Page 317: Towing Requirements
STARTING AND OPERATING 317 NOTE: Remember that everything put into or on the CAUTION! trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, • Avoid towing a trailer for the first 500 miles (805 must be considered as part of the total load on your km) of vehicle operation.
Page 318 318 STARTING AND OPERATING • Safety chains must always be used between your WARNING! vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the Improper towing can lead to an injury accident. chains under the trailer tongue and allow enough Follow these guidelines to make your trailer towing slack for turning corners.
Page 319 STARTING AND OPERATING 319 2. GTW − Check for signs of tire wear or visible tire damage before towing a trailer. Refer to the Tires–General 3. GAWR Information section of this manual on Tread Wear 4. Tongue weight rating for the trailer hitch utilized Indicators for the proper inspection procedure.
Page 320 320 STARTING AND OPERATING − An electronically actuated trailer brake controller is WARNING! required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with Do not connect trailer brakes to your vehicle’s hy- a hydraulic surge actuated brake system, an electronic draulic brake lines.
Page 321: Towing Tips
STARTING AND OPERATING 321 NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. 7- Pin Connector Towing Tips Before setting out on a trip, practice turning, stopping...
Page 322 322 STARTING AND OPERATING If using a manual transmission vehicle for trailer towing, 45 minutes of continuous operation. See Schedule “B” in all starts must be in FIRST gear to avoid excessive clutch section 8 of this manual for transmission fluid change slippage.
Page 323: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 323 − City Driving RECREATIONAL TOWING (BEHIND When stopped for short periods of time, put transmission MOTORHOME, ETC.) in neutral and increase engine idle speed. Towing – 2WD Models − Highway Driving Recreational towing is allowed ONLY if the driveshaft Reduce speed.
Page 324: 4Wd Models
324 STARTING AND OPERATING Towing — Quadra–Trac II /Quadra–Drive II 4WD CAUTION! Models It is necessary to follow these steps to be certain that the transfer case is fully in N (Neutral) before CAUTION! recreational towing to prevent damage to internal parts.
Page 325 STARTING AND OPERATING 325 “Electronic Vehicle Information Center (EVIC)” in Sec- 7. Release brake pedal and ensure that there is no vehicle tion 4 of this manual. (See page 186 for more informa- movement. tion.) 8. Shut the engine off. 9.
Page 326 326 STARTING AND OPERATING Hold down N (Neutral) “pin” switch (with a pen, etc.) for CAUTION! 4 seconds until the LED lamp by the switch starts to blink indicating shift in progress. Lamp will stop blinking (go Transmission damage may occur if the transmission out) when shift is complete.
Page 327 STARTING AND OPERATING 327 NOTE: When shifting out of transfer case N (Neutral), turning the engine OFF may be required to avoid gear clash. WARNING! You or others could be injured if you leave the vehicle unattended with the transfer case in the N (Neutral) position without first fully engaging the parking brake.
Page 328: Snow Plow
328 STARTING AND OPERATING WARNING! CAUTION! Do not add a snow plow, winches, or any other Do not use a bumper mounted clamp-on tow bar on aftermarket equipment to the front of your vehicle. your vehicle. The bumper face bar will be damaged. This could adversely affect the functioning of the airbag system and you could be injured.
Page 329: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....330 Jacking Instructions ....335 If Your Engine Overheats .
Page 330: Hazard Warning Flashers
330 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS Your vehicle’s hazard warning flasher is an emergency warning system. When you activate it, all front and rear directional signals will flash intermittently. Use it when your vehicle is disabled on or near the road. It warns other drivers to steer clear of you and your vehicle.
Page 331: If Your Engine Overheats
WHAT TO DO IN EMERGENCIES 331 IF YOUR ENGINE OVERHEATS CAUTION! In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- Driving with a hot cooling system could damage tion. your vehicle. If the temperature gauge reads “H”, pull over and stop the vehicle.
Page 332: Jacking And Tire Changing
332 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING Jack Location The scissor-type jack and tire changing tools are located in a compartment behind the third row seat. Refer to WARNING! “Cargo Area Features” in Section 3 of this manual. (See •...
Page 333: Spare Tire Stowage
WHAT TO DO IN EMERGENCIES 333 Spare Tire Stowage The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism. To remove or stow the spare, use the jack handle to rotate the “spare tire drive”...
Page 334: Spare Tire Removal
334 WHAT TO DO IN EMERGENCIES Spare Tire Removal Preparations For Jacking Fit the jack handle extension over the drive nut. Use the Park the vehicle on a firm level surface, avoid ice or Lug Wrench to rotate the nut counter clockwise until the slippery areas, set the parking brake and place the gear spare is on the ground with enough slack in the cable to selector in P (Park).
Page 335: Jacking Instructions
WHAT TO DO IN EMERGENCIES 335 For example, if changing the right front tire, block the 3. Assemble the jack and jacking tools as shown. Connect left rear wheel. jack handle driver (A) to two extensions (B), then to the lug wrench (C).
Page 336 336 WHAT TO DO IN EMERGENCIES 4. Locate the jack as shown. For the front axle, place it under the front lower control arm as shown. For the rear axle, place it under the axle near the wheel to be changed. Ensure the jack is closest to the inside of the wheel when jacking on the rear axle.
Page 337 WHAT TO DO IN EMERGENCIES 337 9. Finish tightening the lug nuts. Push down on the WARNING! wrench while tightening for increased leverage. Alternate nuts until each nut has been tightened twice. Correct Raising the vehicle higher than necessary can make wheel nut tightness is 130 N·m (95 ft.
Page 338: Jump Starting Procedure
338 WHAT TO DO IN EMERGENCIES NOTE: Tire should be stowed with the “beauty” side JUMP STARTING PROCEDURE up. Storing the tire upside down may result in scratching NOTE: Check the charge indicator on the battery. If the or damage to the wheel face. Continue winching up the indicator is light or yellow, replace the battery.
Page 339 WHAT TO DO IN EMERGENCIES 339 5. Connect the other cable, first to the negative terminal WARNING! of the booster battery and then connect the other end to a non-paint metal surface on the engine of the vehicle Jump starting can be dangerous. To avoid personal with the discharged battery.
Page 340: Emergency Tow Hooks - If Equipped
340 WHAT TO DO IN EMERGENCIES • Be sure your vehicle is not touching the jump start EMERGENCY TOW HOOKS — IF EQUIPPED vehicle. If your vehicle is equipped with tow hooks, there will be one in the rear and two mounted on the front of the •...
Page 341: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 341 the vehicle on a flatbed or with one end of the vehicle WARNING! raised and the other end on a towing dolly. Stand clear of vehicles when pulling with tow 4WD Models Only hooks. Tow straps and chains may break, causing The manufacturer recommends towing with all four serious injury.
Page 343: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS 3.7L Engine ......345 Maintenance Procedures ....351 4.7L Engine .
Page 344 344 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance ... . . 360 Appearance Care And Protection From Corrosion ......377 Power Steering Fluid Check .
Page 345: 3.7L Engine
MAINTAINING YOUR VEHICLE 345 3.7L ENGINE...
Page 346: 4.7L Engine
346 MAINTAINING YOUR VEHICLE 4.7L ENGINE...
Page 347: L Engine
MAINTAINING YOUR VEHICLE 347 5.7L ENGINE...
Page 348: Onboard Diagnostic System - Obd Ii
348 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors • Prolonged driving with the “Malfunction Indica- the performance of the emissions, engine, and automatic tor Light”...
Page 349: Emissions Inspection And Maintenance Programs
MAINTAINING YOUR VEHICLE 349 cap until a clicking sound is heard. This is an indication is functioning and is not on when the engine is running, that the gas cap is properly tightened. Press the odometer and that the OBD (On Board Diagnostic) system is ready reset button to turn the message off.
Page 350: Replacement Parts
350 MAINTAINING YOUR VEHICLE 4. As soon as you turn your key to the ON position, you you may need to do nothing more than drive your will see your MIL symbol come on as part of a normal vehicle as you normally would in order for your OBD bulb check.
Page 351: Dealer Service
MAINTAINING YOUR VEHICLE 351 DEALER SERVICE WARNING! Your dealer has the qualified service personnel, special tools and equipment to perform all service operations in You can be badly injured working on or around a an expert manner. Service Manuals are available which motor vehicle.
Page 352: Engine Oil
352 MAINTAINING YOUR VEHICLE could adversely affect the engine or vehicle performance. CAUTION! These items should be inspected if a malfunction is observed or suspected. Overfilling or underfilling the crankcase will cause aeration or loss of oil pressure. This could damage Engine Oil your engine.
Page 353 MAINTAINING YOUR VEHICLE 353 • More than 50% of your driving is at sustained high Engine Oil Selection speeds during hot weather, above 90°F (32°C) For best performance and maximum protection for all engines under all types of operating conditions, the •...
Page 354 354 MAINTAINING YOUR VEHICLE American Petroleum Institute (API) Engine Oil Engine Oil Viscosity (5.7L Engines) Identification Symbol SAE 5W-20 engine oil is recommended for all operating This symbol means that the oil has temperatures. This engine oil improves low tempera- been certified by the American ture starting and vehicle fuel economy.
Page 355: Drive Belts - Check Condition And Tensioner
MAINTAINING YOUR VEHICLE 355 Materials Added to Engine Oils Engine Oil Filter Selection The manufacturer strongly recommends against the ad- All of the manufacturer’s engines have a full-flow type dition of any additives (other than leak detection dyes) to disposable oil filter. Use a filter of this type for replace- engine oil.
Page 356: Spark Plugs
356 MAINTAINING YOUR VEHICLE Belts should be inspected for evidence of cuts, cracks, Catalytic Converter glazing, or frayed cords and replaced if there is indication The catalytic converter requires the use of unleaded fuel of damage which could result in belt failure. Low gen- only.
Page 357 MAINTAINING YOUR VEHICLE 357 WARNING! CAUTION! A hot exhaust system can start a fire if you park over Damage to the catalytic converter can result if your materials that can burn. Such materials might be vehicle is not kept in proper operating condition. In grass or leaves coming into contact with your ex- the event of engine malfunction, particularly involv- haust system.
Page 358: Crankcase Emission Control System
358 MAINTAINING YOUR VEHICLE To minimize the possibility of catalytic converter damage: Crankcase Emission Control System Proper operation of this system depends on freedom • Do not shut off the engine or interrupt the ignition from sticking or plugging due to deposits. As vehicle when the transmission is in gear and the vehicle is in mileage builds up, the PCV valve and passages may motion.
Page 359: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 359 WARNING! WARNING! The air cleaner can provide protection in the case of Battery posts, terminals, and related accessories con- engine backfire. Do not remove the air cleaner tain lead and lead compounds. Always wash hands unless it is necessary for repair or maintenance. after handling the battery.
Page 360: Air Conditioner Maintenance
360 MAINTAINING YOUR VEHICLE To determine the battery charge, check the battery test Air Conditioner Maintenance indicator (if equipped) on top of the battery. Refer to the For best possible performance, your air conditioner illustration. should be checked and serviced by an Authorized Dealer at the start of each warm season.
Page 361: Power Steering Fluid Check
MAINTAINING YOUR VEHICLE 361 Refrigerant Recovery and Recycling WARNING! R-134a Air Conditioning Refrigerant is a hydrofluorocar- • Use only refrigerants and compressor lubricants bon (HFC) that is endorsed by the Environmental Pro- tection Agency and is an ozone-saving product. How- approved by the manufacturer for your air condi- ever, the manufacturer recommends that air conditioning tioning system.
Page 362 362 MAINTAINING YOUR VEHICLE WARNING! CAUTION! Fluid level should be checked on a level surface with Do not use Automatic Transmission Fluid (ATF) or the engine off to prevent injury from moving parts, other types of power steering fluids when servicing and to insure accurate fluid level reading.
Page 363: Body Lubrication
MAINTAINING YOUR VEHICLE 363 Body Lubrication Windshield Wiper Blades Locks and all body pivot points, including such items as The rubber edges of the wiper blades and the windshield seat tracks, doors, tailgate and hood hinges, should be should be cleaned periodically with a sponge or soft cloth lubricated periodically to assure quiet, easy operation and a mild nonabrasive cleaner to remove accumulations and to protect against rust and wear.
Page 364: Exhaust System
364 MAINTAINING YOUR VEHICLE The fluid reservoir for the windshield washers and the Exhaust System rear window washer is shared. It is located in the front of The best protection against carbon monoxide entry into the engine compartment (on the driver side), and should the vehicle body is a properly maintained engine exhaust be checked for fluid level at regular intervals.
Page 365: Cooling System
MAINTAINING YOUR VEHICLE 365 for any accumulation of bugs, leaves, etc. If dirty, clean by Cooling System gently spraying water from a garden hose vertically down the face of the condenser. WARNING! Check the engine cooling system hoses for brittle rubber, You or others can be badly burned by hot antifreeze/ cracking, tears, cuts, and tightness of the connection at coolant or steam from your radiator.
Page 366 366 MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush, And Refill CAUTION! At the intervals shown in the appropriate “Maintenance Schedule,” the system should be drained, flushed, and Mixing of antifreeze/coolant other than the specified refilled. HOAT antifreeze/coolant may result in decreased corrosion protection and engine damage.
Page 367 MAINTAINING YOUR VEHICLE 367 Use only high purity water such as distilled or deionized Adding Engine Coolant Your vehicle has been built with an improved antifreeze/ water when mixing the water/antifreeze (coolant) solu- coolant that allows extended maintenance intervals. This tion.
Page 368 368 MAINTAINING YOUR VEHICLE The cap should be inspected and cleaned if there is any children, do not store ethylene glycol-based antifreeze/ accumulation of foreign material on the sealing surfaces. coolant in open containers or allow it to remain in puddles on the ground.
Page 369 MAINTAINING YOUR VEHICLE 369 When additional antifreeze/coolant is needed to main- coolant needs to be added, contents of coolant recov- tain the proper level, it should be added to the coolant ery bottle must also be protected against freezing. bottle. Do not overfill. •...
Page 370: Hoses And Vacuum/Vapor Harnesses
370 MAINTAINING YOUR VEHICLE ONLY the correct type thermostat. Other designs may are present. Components should be replaced immedi- result in unsatisfactory cooling performance, poor gas ately if there is any evidence of degradation that could mileage, and increased emissions. cause failure.
Page 371 MAINTAINING YOUR VEHICLE 371 NOTE: Inspection of brake hoses should be done when- Brake and Power Steering System Hoses When servicing the vehicle for scheduled maintenance, ever the brake system is serviced and every engine oil inspect surface of hoses for evidence of heat and me- change.
Page 372: Automatic Transmission
372 MAINTAINING YOUR VEHICLE fluid reservoir. With disc brakes, fluid level can be WARNING! expected to fall as the brake pads wear. However, low fluid level may be caused by a leak and a checkup may be Overfilling the brake fluid reservoir can result in needed.
Page 373 MAINTAINING YOUR VEHICLE 373 for correct fluid type. It is important that the transmission is sealed and should not be tampered with. Your autho- fluid be maintained at the prescribed level using the rized dealer has the proper tools to ensure that the fluid recommended fluid.
Page 374 374 MAINTAINING YOUR VEHICLE 5. Remove the dipstick, wipe it clean and reinsert it until (upper) reference holes when the transmission reaches seated. 180°F (82°C). Remember it is best to check the level at the normal operating temperature. 6. Remove the dipstick again and note the fluid level on both sides.
Page 375: Transfer Case
MAINTAINING YOUR VEHICLE 375 Special Additives Drain The manufacturer recommends against the addition of First remove fill plug, then remove drain plug. Recom- any additives to the transmission. Exception to this mended tightening torque for drain and fill plugs is policy is the use of special dyes to aid in detecting fluid 15–25 ft.
Page 376: Front/Rear Axle Fluid
376 MAINTAINING YOUR VEHICLE Front/Rear Axle Fluid Maintenance After Off-Pavement Driving After extended operation in mud, sand or water, or Front Axle Fluid Level Check similar dirty conditions, have your brake discs, brake Lubricant should be to the bottom of the oil fill hole. linings, and axle joints inspected and cleaned as soon as Rear Axle Fluid Level Check possible.
Page 377: Appearance Care And Protection From Corrosion
MAINTAINING YOUR VEHICLE 377 What Causes Corrosion? CAUTION! Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. Under frequent heavy-duty driving conditions, change all lubricants and lubricate body compo- The most common causes are: nents, all driveline joints and steering linkage more •...
Page 378 378 MAINTAINING YOUR VEHICLE • If insects, tar, or other similar deposits have accumu- Special Care lated on your vehicle, use Mopar Super Kleen Bug • If you drive on salted or dusty roads or if you drive and Tar Remover to remove. near the ocean, hose off the undercarriage at least once •...
Page 379 MAINTAINING YOUR VEHICLE 379 • Aluminum wheels should be cleaned regularly with a Interior Care mild soap and water to prevent corrosion. To remove Use Mopar Total Clean to clean fabric upholstery and heavy soil, use Mopar Wheel Cleaner or select a carpeting.
Page 380 380 MAINTAINING YOUR VEHICLE do not use polishes, oils, cleaning fluids, solvents, deter- When cleaning the rear view mirror, spray cleaner on the gents, or ammonia based cleaners to clean your leather towel or rag that you are using. Do not spray cleaner upholstery.
Page 381: Fuse Panel
MAINTAINING YOUR VEHICLE 381 Seat Belt Maintenance FUSE PANEL Do not bleach, dye or clean the belts with chemical Interior Fuses solvents or abrasive cleaners. This will weaken the fabric. The fuse panel is on the lower instrument panel just to Sun damage will also weaken the fabric.
Page 382 382 MAINTAINING YOUR VEHICLE Cavity Fuse/Color Description Cavity Fuse/Color Description 30 Amp Pink Audio Amp (B+) 10 Amp Red SCM, Cluster OBD (B+) 15 Amp Blue Sunroof (B+) 15 Amp Blue Flipper Glass (B+) 10 Amp Red Htd Mirror (EBL) 10 Amp Red OCM (R/S) 20 Amp Yellow Rr Pwr Out (B+)
Page 383: Underhood Fuses (Power Distribution Center)
MAINTAINING YOUR VEHICLE 383 Underhood Fuses (Power Distribution Center) Cavity Fuse/Color Description 30 Amp Pink ABS Pump 50 Amp Red Cabin Htr 1 (Diesel Only) 50 Amp Red 30 Amp Pink Rr HVAC (XK) 40 Amp Green Acc Delay/Seats Spare 40 Amp Green Starter/JB Power 30 Amp Pink...
Page 384 384 MAINTAINING YOUR VEHICLE Cavity Fuse/Color Description Cavity Fuse/Color Description 20 Amp Yellow PCM Batt (Gasoline Only) Micro Relay Fuel Pump Rly 30 Amp Pink ABS Valves Mini Relay Cabin Htr 3 Rly (Diesel Only) Spare Mini Relay Cabin Htr 2 Rly (Diesel 20 Amp Yellow FDCM Only)
Page 385: Underhood Fuses (Integrated Power Module)
MAINTAINING YOUR VEHICLE 385 Underhood Fuses (Integrated Power Module) Cavity Fuse/Color Description Micro Relay Rear Fog Rly (BUX Only) Micro Relay Lt T-Tow Stop/Turn Rly Micro Relay Rt T-Tow Stop/Turn Rly Micro Relay Park Lamps Rly 10 Amp Red Lt Park Lamps 10 Amp Red T-Tow Park Lamps 10 Amp Red...
Page 386: Vehicle Storage
386 MAINTAINING YOUR VEHICLE VEHICLE STORAGE Cavity Fuse/Color Description If you are leaving your vehicle dormant for more than 21 20 Amp Yellow FCM Batt #3 days you may want to take steps to protect your battery. 20 Amp Yellow Rt T-Tow Stop/Turn You may: 30 Amp Pink FDCM Mod...
Page 387: Replacement Bulbs
MAINTAINING YOUR VEHICLE 387 REPLACEMENT BULBS Exterior Lights Bulb Type Backup Lights ......3057K Interior Lights Bulb Type Front Fog Lights .
Page 388: Fluid Capacities
388 MAINTAINING YOUR VEHICLE FLUID CAPACITIES U.S. Metric 20.6 Gallons 78 Liters Fuel (Approximate) Engine Oil with Filter 3.7 Liter Engine (5W-30, API Certified) 5 Qts 4.7 Liters 4.7 Liter Engine (5W-30, API Certified) 6 Qts 5.7 Liters 5.7 Liter Engine (5W-20, API Certified) 7 Qts 6.6 Liters Cooling System *...
Page 389: Fluids, Lubricants, And Genuine Parts
MAINTAINING YOUR VEHICLE 389 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or- ganic Additive Technology) Engine Oil (3.7L/4.7L Engines) Use API Certified SAE 5W-30 Engine Oil, meeting the requirements of DaimlerChrysler Material Standard MS-6395.
Page 390: Chassis
390 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Mopar ATF+4 Automatic Transmission Fluid Transfer Case (3.7L Engines) Mopar ATF+4 Automatic Transmission Fluid Transfer Case (4.7L/5.7L Engines) Mopar NV 247 Transfer Case Lubricant Axle Differential (Front-Rear) Mopar Synthetic Gear &...
Page 391 MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..392 Schedule “B” ......395 Maintenance Schedules .
Page 392: Emission Control System Maintenance
392 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE MAINTENANCE SCHEDULES The “Scheduled” maintenance services, listed in bold There are two maintenance schedules that show the type must be done at the times or mileages specified to required service for your vehicle. assure the continued proper functioning of the emission First is Schedule B .
Page 393 MAINTENANCE SCHEDULES 393 • Taxi, police, or delivery service (commercial service) Second is Schedule “A”. It is for vehicles that are not operated under any of the conditions listed under Sched- • Off-road or desert driving ule “B.” • If equipped for and operated with E-85 (ethanol) Use the schedule that best describes your driving condi- fuel.
Page 394 394 MAINTENANCE SCHEDULES • Check the windshield washer solvent, add as required. At Each Oil Change • Change the engine oil filter. Once a Month • Check the tire pressure and look for unusual wear or • Inspect the exhaust system. damage.
Page 395: Schedule "B
SCHEDULE “B” 395 • Taxi, police, or delivery service (commercial service) Schedule “B” Follow this schedule if you usually operate your vehicle • Off-road or desert driving under one or more of the following conditions. • If equipped for and operated with E-85 (ethanol) •...
Page 396 396 SCHEDULE “B” Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) Change the engine oil and engine oil filter, if not replaced at 3 months. Rotate the tires. Check spare tire for proper pressure and correct stowage.
Page 397 SCHEDULE “B” 397 Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers) (30 000) (35 000) (40 000) (45 000) (50 000) Change the engine oil and engine oil filter, if not replaced at 3 months. Rotate the tires. Check spare tire for proper pressure and correct stowage.
Page 398 398 SCHEDULE “B” Miles 33,000 36,000 39,000 42,000 45,000 (Kilometers) (55 000) (60 000) (65 000) (70 000) (75 000) Change the engine oil and engine oil filter, if not replaced at 3 months. Rotate the tires. Check spare tire for proper pressure and correct stowage.
Page 399 SCHEDULE “B” 399 Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) Change the engine oil and engine oil filter, if not replaced at 3 months. Rotate the tires. Check spare tire for proper pressure and correct stowage.
Page 400 400 SCHEDULE “B” Miles 63,000 66,000 69,000 72,000 75,000 (Kilometers) (105 000) (110 000) (115 000) (120 000) (125 000) Change the engine oil and engine oil filter, if not replaced at 3 months. Rotate the tires. Check spare tire for proper pressure and correct stowage.
Page 401 SCHEDULE “B” 401 Miles 78,000 81,000 84,000 87,000 90,000 (Kilometers) (130 000) (135 000) (140 000) (145 000) (150 000) Change the engine oil and engine oil filter, if not replaced at 3 months. Rotate the tires. Check spare tire for proper pressure and correct stowage.
Page 402 402 SCHEDULE “B” Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change the engine oil and engine oil filter, if not replaced at 3 months. Rotate the tires. Check spare tire for proper pressure and correct stowage.
Page 403 SCHEDULE “B” 403 Miles 108,000 111,000 114,000 117,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change the engine oil and engine oil filter, if not replaced at 3 months. Rotate the tires. Check spare tire for proper pressure and correct stowage.
Page 404 404 SCHEDULE “B” Miles 108,000 111,000 114,000 117,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Flush and replace the engine coolant/anti-freeze at 120 months, if not replaced at 102,000 miles (170 000 km). Inspection and service should also be performed anytime * This maintenance is not required if the belt was a malfunction is observed or suspected.
Page 405: Schedule "A
SCHEDULE “A” 405 Schedule “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [Months] [12] [18] [24] [30] Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and correct stowage.
Page 406 406 SCHEDULE “A” Miles 36,000 42,000 48,000 54, 000 (Kilometers) (60 000) (70 000) (80 000) (90 000) [Months] [36] [42] [48] [54] Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and correct stowage. Inspect the brake linings.
Page 407 SCHEDULE “A” 407 Miles 60,000 66,000 72,000 78,000 (Kilometers) (100 000) (110 000) (120 000) (130 000) [Months] [60] [66] [72] [78] Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and correct stowage. Inspect the engine air cleaner filter, and replace if nec- essary.
Page 408 408 SCHEDULE “A” Miles 84,000 90,000 96,000 102, 000 (Kilometers) (140 000) (150 000) (160 000) (170 000) [Months] [84] [90] [96] [102] Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and correct stowage. Inspect the engine air cleaner filter, and replace if nec- essary.
Page 409 SCHEDULE “A” 409 Miles 108,000 114,000 120,000 (Kilometers) (180 000) (190 000) (200 000) [Months] [108] [114] [120] Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and correct stowage. Inspect the engine air cleaner filter, and replace if necessary. Inspect the PCV Valve, replace if necessary.
Page 410 410 SCHEDULE “A” * This maintenance is not required if the belt was previously replaced. WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
Page 411: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Reporting Safety Defects ....415 Vehicle ......412 In Canada .
Page 412: Suggestions For Obtaining Service For Your Vehicle
Warranty service must be done by an authorized or work done that is not on your maintenance log, let the Chrysler, Dodge, or Jeep dealer. We strongly recommend service advisor know. that you take your vehicle to your selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.
Page 413 IF YOU NEED CONSUMER ASSISTANCE 413 • Vehicle identification number technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely • Vehicle delivery date and mileage manner. DaimlerChrysler Motors Corporation Customer Center This is why you should always talk to your dealer’s P.O.
Page 414 414 IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech contract, call the manufacturer’s Service Contract Na- Impaired (TDD/TTY) tional Customer Hotline at 1-800-521-9922. To assist customers who have hearing difficulties, the The manufacturer will not stand behind any service manufacturer has installed special TDD (Telecommuni- contract that is not the manufacturer’s Service Contract.
Page 415: Warranty Information (U.s. Vehicles Only)
IF YOU NEED CONSUMER ASSISTANCE 415 campaign. However, NHTSA cannot become involved in WARRANTY INFORMATION (U.S. Vehicles Only) See the Warranty Information Booklet for the terms and individual problems between you, your dealer, and the provisions of DaimlerChrysler’s warranties applicable to manufacturer.
Page 416: Publication Order Forms
416 IF YOU NEED CONSUMER ASSISTANCE • Diagnostic Procedure Manuals. PUBLICATION ORDER FORMS To order the following manuals, you may use either the Filled with diagrams, charts and detailed illustrations, website or the phone numbers listed below. Visa, Mas- these practical manuals make it easy for students and tercard, American Express, and Discover orders are ac- technicians to find and fix problems on computer- cepted.
Page 417: Department Of Transportation Uniform Tire Quality Grades
IF YOU NEED CONSUMER ASSISTANCE 417 All Passenger Car Tires Must Conform to Federal Safety Call Toll Free at: Requirements in Addition to These Grades. • 1–800–890–4038 (U.S.) Treadwear • 1–800–387–1143 (Canada) The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled con- ditions on a specified government test course.
Page 418: Temperature Grades
418 IF YOU NEED CONSUMER ASSISTANCE on specified government test surfaces of asphalt and grade C corresponds to a level of performance which all concrete. A tire marked C may have poor traction perfor- passenger car tires must meet under the Federal Motor mance.
Page 419 INDEX...
Page 420 420 INDEX ABS (Anti-Lock Brake System) ... . 179,271 Alterations/Modifications, Vehicle ... . . 9 Adding Washer Fluid ..... 169 Antenna, Satellite Radio .
Page 421 INDEX 421 Autostick ......258 Warning Light ......178 Auxiliary Electrical Outlet (Power Outlet) .
Page 422 422 INDEX Chains, Tire ......303 Coolant Capacity ..... . 388 Changing A Flat Tire .
Page 423 INDEX 423 Defroster, Rear Window ....233 Off-Road ......276 Defroster, Windshield .
Page 424 424 INDEX Block Heater ......255 Engine Oil Viscosity Chart ....354 Break-In Recommendations .
Page 425 INDEX 425 Fluid Leaks ......71 Gasoline ......305 Fluid Level Checks Gauge .
Page 426 426 INDEX Gear Ranges ......257 Holder, Cup ......164 General Information .
Page 427 INDEX 427 Interior Lighting ......120 LATCH Interior Lights ..... . . 120,125 (Lower Anchors and Tether for CHildren) .
Page 428 428 INDEX Dimmer Switch, Headlight ... . . 122,126 Passing ......126 Electronic Stability Program (ESP) Reading .
Page 429 INDEX 429 Liftgate, Tailgate ......18 Memory Seats and Radio ....114 Power Door .
Page 430 430 INDEX Occupant Classification System (OCS) ..48 Outside Rearview Mirrors ....80 Occupant Restraints ..... . . 32 Overdrive .
Page 431 INDEX 431 Polishing and Waxing ..... 378 Radial Ply Tires ......293 Power Radio Broadcast Signals .
Page 432 432 INDEX Recorder, Event Data ..... . 56 Safety Checks Inside Vehicle ....70 Recreational Towing .
Page 433 INDEX 433 Reminder ......183 Sentry Key Programming ....17 Shoulder Belt Anchorage .
Page 434 434 INDEX Oil ....... . 353 Supplemental Restraint System - Airbag ..42 Speed Control (Cruise Control) .
Page 435 INDEX 435 Inflation Pressures ..... 290 Tow/Haul Indicator Light ....183 Jacking .
Page 436 436 INDEX Transmission Vehicle Identification Number (VIN) ... . 8 Automatic ......256,372 Vehicle Loading .
Page 437 INDEX 437 Windows Power ....... 29 Windshield Defroster ....71,234,241 Windshield Washers .
Page 438 438 INDEX...
Page 439 NOTES...
Page 440 NOTES...

This manual is also suitable for:

2006 commander Commander