Position Shift Arm; Shifter Arm Shaft; Shift Arm Retainer Bolt; Shifter Arm Shaft Plug - Jeep Wrangler 2001 Service Manual

TJ
MANUAL-AX5 (Continued)
Fig. 71 Position Shift Arm
1 - SHIFT ARM
(11) Start shifter arm shaft in hole in back of
adapter or extension housing. Align shift arm and
shifter arm shaft. Insert shifter arm shaft through
the shifter arm and into forward portion of the
adapter or extension housing (Fig. 72).
Fig. 72 Shifter Arm Shaft
1 - SHIFT ARM
2 - ADAPTER OR EXTENSION HOUSING
2001 JEEP WRANGLER
(12) Rotate shifter arm shaft until the hole in the
shift arm is aligned with the hole in the shaft.
(13) Install shift arm retainer bolt and tighten to
38 N·m (28 ft. lbs.) (Fig. 73).
1 - RETAINER BOLT
2 - SHIFT ARM
(14) Install and tighten shifter arm shaft plug to
18 N·m (13 ft. lbs.) (Fig. 74).
1 - SHAFT PLUG
MANUAL-AX5
Fig. 73 Shift Arm Retainer Bolt
Fig. 74 Shifter Arm Shaft Plug
21s - 21