Retaining Ring; Thrust Retainer; Third Gear Bearing - Jeep Wrangler 2001 Service Manual

21s - 54 MANUAL-NV3550
MANUAL-NV3550 (Continued)
(24) Start retaining ring around two-piece thrust
washer (Fig. 71). Ensure locating dimple is between
the thrust washer halves.
Fig. 71 RETAINING RING
1 - THRUST WASHER RETAINING RING
2 - THRUST WASHER HALVES
3 - SECOND GEAR
4 - LOCATING DIMPLE
(25) Seat thrust washer retaining ring with plastic
mallet (Fig. 72).
Fig. 72 THRUST RETAINER
1 - PLASTIC MALLET
2 - THRUST WASHER RETAINING RING
2001 JEEP WRANGLER
(26) Install third gear needle bearing on shaft (Fig.
73).

1 - THIRD GEAR BEARING

(27) Install third gear on shaft and bearing (Fig.
74).
1 - THIRD GEAR
2 - BEARING
Fig. 73 THIRD GEAR BEARING
Fig. 74 THIRD GEAR
TJ