Front Band; Planetary Geartrain; Rear Band Adjuster Location; Low-Reverse Drum Snap-Ring - Jeep Wrangler 2001 Service Manual

21s - 80 AUTOMATIC - 30RH
AUTOMATIC - 30RH (Continued)
(23) Remove front band from case (Fig. 11).
(24) Remove extension housing from transmission
case.
(25) Remove governor body and park gear from
output shaft.
(26) Remove output shaft and planetary geartrain
as assembly (Fig. 12). Support geartrain with both
hands during removal. Do not allow machined sur-
faces on output shaft to become nicked or scratched.
Fig. 11 Front Band

1 - FRONT BAND

2 - TRANSMISSION HOUSING
Fig. 12 Planetary Geartrain
1 - SLOTS
2 - LOW-REVERSE DRUM

3 - PLANETARY GEARTRAIN

4 - TRANSMISSION HOUSING
5 - LUGS
2001 JEEP WRANGLER
(27) Loosen rear band adjusting screw 4-5 turns
(Fig. 13).
(28) Remove snap-ring that secures low-reverse
drum to rear support hub, however do not remove
drum (Fig. 14).
(29) Remove bolts attaching rear support to trans-
mission case and pull support from low-reverse drum
(Fig. 15).
(30) Remove bolts attaching overrunning clutch
cam and low-reverse drum to transmission case (Fig.
16).
1 - PLANETARY GEARTRAIN
2 - REAR BAND
3 - LEVER
4 - SERVO
5 - ADJUSTER
1 - REAR BAND
2 - REAR SUPPORT HUB

3 - LOW-REVERSE DRUM SNAP-RING

4 - LOW-REVERSE DRUM
Fig. 13 Rear Band Adjuster Location
Fig. 14 Low-Reverse Drum Snap-Ring
TJ