Second Gear Bearing; Second Gear; Two-Piece Thrust Wash - Jeep Wrangler 2001 Service Manual

TJ
MANUAL-NV3550 (Continued)
(21) Install second gear needle bearing on shaft
(Fig. 68).
Fig. 68 SECOND GEAR BEARING

1 - SECOND GEAR BEARING

2 - SPECIAL TOOL 6310–1
(22) Install second gear onto shaft and bearing
(Fig. 69). Verify second gear is fully seated on syn-
chro components.
Fig. 69 SECOND GEAR
1 - CUP
2 - 1–2 SYNCHRO ASSEMBLY
3 - BEARING

4 - SECOND GEAR

2001 JEEP WRANGLER
(23) Install two-piece thrust washer (Fig. 70).
Ensure washer halves are seated in shaft groove and
that washer lugs are seated in shaft lug bores. Verify
i.d. grooves and markings noted during removal are
facing the correct direction.
1 - WASHER GROOVE IN SHAFT
2 - LUG BORE
3 - THRUST WASHER LUGS
4 - LUG BORE
5 - LUG
6 - WASHER HALF
MANUAL-NV3550
Fig. 70 TWO-PIECE THRUST WASH
21s - 53