Front Band Strut; Front/Rear Clutch Assemblies; Separating Front Clutch From Rear Clutch; Output Shaft Thrust Plate And Washer - Jeep Wrangler 2001 Service Manual

TJ
AUTOMATIC - 30RH (Continued)
Fig. 7 Front Band Strut
1 - BAND LEVER
2 - BAND STRUT
3 - FRONT BAND
(19) Remove front and rear clutch units as an
assembly. Grasp input shaft, hold clutch units
together and remove them from case (Fig. 8).
Fig. 8 Front/Rear Clutch Assemblies
1 - FRONT BAND
2 - FRONT CLUTCH AND DRUM
3 - TRANSMISSION HOUSING
4 - REAR CLUTCH
2001 JEEP WRANGLER
(20) Lift front clutch off rear clutch (Fig. 9). Set
clutch units aside for overhaul.
Fig. 9 Separating Front Clutch From Rear Clutch
1 - FRONT CLUTCH
2 - REAR CLUTCH
(21) Remove output shaft thrust washer from out-
put shaft (or from rear clutch hub) (Fig. 10).
(22) Remove output shaft thrust plate and washer
from output shaft hub (Fig. 10).
Fig. 10 Output Shaft Thrust Plate and Washer
1 - OUTPUT SHAFT
2 - THRUST PLATE
3 - THRUST WASHER
AUTOMATIC - 30RH 21s - 79