Shift Shaft Lever And Bushing Roll Pin; Shift Shaft; Shift Shaft Lever And Bushing; Shift Fork - Jeep Wrangler 2001 Service Manual

21s - 40 MANUAL-NV3550
MANUAL-NV3550 (Continued)
(2) With a hammer and punch drive out roll pin
that secures shift bushing and lever to shift shaft
(Fig. 20).
NOTE: Use proper size punch to avoid bending the

shift shaft.

Fig. 20 SHIFT SHAFT LEVER AND BUSHING ROLL
1 - PIN PUNCH
2 - BUSHING AND LEVER
3 - SHIFT SHAFT
(3) Pull shift shaft straight (Fig. 21) out of rear
housing.
Fig. 21 SHIFT SHAFT
1 - SHIFTER SHAFT
2 - SHIFTER SHAFT DETENT

3 - 3-4 SHIFT FORK

(4) Remove shift socket from rear housing (Fig.
22).
(5) Remove lever and bushing (Fig. 23).
2001 JEEP WRANGLER
PIN
Fig. 22 SHIFT SOCKET AND ROLL PIN
1 - SHAFT BORE
2 - ROLL PIN
3 - SHIFT SOCKET
Fig. 23 SHIFT SHAFT LEVER AND BUSHING
1 - SHAFT LEVER AND BUSHING
2 - 3-4 FORK
(6) Rotate 3-4 fork around synchro sleeve until
fork clears shift arms on 1-2 and fifth-reverse forks,
then remove 3-4 fork (Fig. 24).
Fig. 24 3-4 SHIFT FORK
1 - 3–4 FORK
2 - 1–2 AND 5TH-REVERSE FORK ARMS
3 - 3–4 SYNCHRO SLEEVE
TJ