Checking Input Shaft End Play; Front Band Adjusting Screw Lock Nut; Oil Pump/Reaction Shaft Support - Jeep Wrangler 2001 Service Manual

21s - 78 AUTOMATIC - 30RH
AUTOMATIC - 30RH (Continued)
(d) Position the dial indicator plunger against a
flat spot on the oil pump and zero the dial indica-
tor.
(e) Move input shaft in and out and record read-
ing.
Fig. 4 Checking Input Shaft End Play
1 - TOOL 8266-8
2 - TOOL 8266-7
3 - TOOL C-3339
(13) Loosen front band adjusting screw lock nut
(Fig. 5) 4-5 turns. Then tighten band adjusting screw
until band is tight around front clutch. This prevents
front/rear clutches from coming out with pump and
possibly damaging clutch or pump components.
(14) Remove oil pump bolts.
(15) Thread bolts of Slide Hammer Tools C-3752
into threaded holes in pump body flange (Fig. 6).
(16) Bump slide hammer weights outward to
remove pump and reaction shaft support assembly
from case (Fig. 6).
2001 JEEP WRANGLER
(17) Loosen front band adjusting screw until band
is completely loose (Fig. 5).
(18) Squeeze front band together and remove band
strut (Fig. 7).
Fig. 5 Front Band Adjusting Screw Lock Nut
1 - LOCK-NUT
2 - FRONT BAND ADJUSTER
1 - OIL PUMP AND REACTION SHAFT SUPPORT ASSEMBLY
2 - SLIDE HAMMER TOOLS C-3752
Fig. 6 Oil Pump/Reaction Shaft Support
TJ