Rear Seat Belt & Retractor; Rear Seat Shoulder Belt & Retractor Remove/Install; Turning Loop; Removal - Jeep Wrangler 2001 Service Manual

8Os - 24 RESTRAINTS
REAR SEAT BELT &
RETRACTOR

REMOVAL

WARNING: DURING AND FOLLOWING ANY SEAT
BELT SERVICE, CAREFULLY INSPECT ALL SEAT
BELTS, BUCKLES, MOUNTING HARDWARE, AND
RETRACTORS FOR
OPERATION, OR DAMAGE. REPLACE ANY BELT
THAT IS CUT, FRAYED, OR TORN. STRAIGHTEN
ANY BELT THAT IS TWISTED. TIGHTEN ANY
LOOSE FASTENERS. REPLACE ANY BELT THAT
HAS A DAMAGED OR INOPERATIVE BUCKLE OR
RETRACTOR. REPLACE ANY BELT THAT HAS A
BENT OR DAMAGED LATCH PLATE OR ANCHOR
PLATE. NEVER ATTEMPT TO REPAIR A SEAT BELT
COMPONENT. ALWAYS REPLACE DAMAGED OR
FAULTY SEAT BELT COMPONENTS WITH THE COR-
RECT, NEW AND UNUSED REPLACEMENT PARTS
LISTED IN THE MOPAR PARTS CATALOG.
(1) Slide both rear seat belt buckle units between
the seat cushion and seat back into the cargo area.
(2) Lift the rear seat back release lever and fold
the rear seat back forward, then tumble the folded
rear seat cushion and back unit forward against the
backs of the two front bucket seats.
(3) Remove the screw that secures the lower
anchor plate of the rear seat shoulder belt to the
inner rear wheel house panel (Fig. 25).
(4) Remove the rear seat shoulder belt lower
anchor plate from the inner rear wheel house panel.
(5) Unsnap and lift the rear shoulder belt turning
loop cover to access the screw that secures the turn-
ing loop anchor plate to the sport bar near the top of
the bar (Fig. 26).
(6) Remove the screw that secures the shoulder
belt turning loop anchor plate to the sport bar.
(7) Remove the shoulder belt turning loop anchor
plate from the sport bar.
(8) Remove the screw that secures the retractor to
the sport bar near the top of the inner rear wheel
house panel.
(9) Remove the rear seat shoulder belt and retrac-
tor from the sport bar.
2001 JEEP WRANGLER
PROPER INSTALLATION,
Fig. 25 Rear Seat Shoulder Belt & Retractor
Remove/Install

1 - TURNING LOOP

2 - SPACER
3 - BELT & RETRACTOR
4 - SPORT BAR
5 - WASHER
6 - SPACER
Fig. 26 Turning Loop
1 - SPORT BAR
2 - TURNING LOOP COVER
3 - TURNING LOOP
4 - REAR SHOULDER BELT
5 - SCREW
TJ