TJ
AUTOMATIC - 30RH
DISASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . 77
AUTOMATIC - 30RH
DISASSEMBLY
(1) Remove transmission from vehicle.
(2) Install a suitable tail shaft housing plug to
avoid contaminating internal components with clean-
ing solvents.
(3) Clean exterior of transmission with suitable
solvent or pressure washer.
(4) Remove torque converter from transmission.
(5) Remove throttle and shift levers from valve
body manual shaft and throttle lever shaft.
(6) Mount transmission in repair stand C-3750-B
or similar type stand (Fig. 1).
(7) Remove extension housing.
(8) Remove fluid pan.
(9) Remove park/neutral position switch and seal
(Fig. 2).
(10) Remove valve body.
(11) Remove accumulator spring and piston (Fig.
3).
Fig. 1 Repair Stand
1 - TRANSMISSION
2 - STAND
2001 JEEP WRANGLER
AUTOMATIC - 30RH
TABLE OF CONTENTS
page
1 - SOLENOID CONNECTOR
2 - PARK/NEUTRAL SWITCH
1 - ACCUMULATOR PISTON
2 - PISTON SPRING
(12) Measure input shaft end play (Fig. 4).
8266-8.
shaft of the transmission and tighten the retaining
screw on Adapter 8266-7 to secure it to the input
shaft.
AUTOMATIC - 30RH
Fig. 2 Park/Neutral Position Switch
Fig. 3 Accumulator Piston And Spring
(a) Attach Adapter 8266-7 to Handle 8266-8.
(b) Attach dial indicator C-3339 to Handle
(c) Install the assembled tool onto the input
21s - 77