Starting 1-2 Synchro; Press 1-2 Synchro; Synchro Hub Snap Ring; Second Gear Synchro Ring - Jeep Wrangler 2001 Service Manual

21s - 52 MANUAL-NV3550
MANUAL-NV3550 (Continued)
Fig. 64 STARTING 1-2 SYNCHRO
1 - 1-2 SYNCHRO ASSEMBLY
2 - CUP
3 - FIRST GEAR SIDE OF SYNCHRO SLEEVE
Fig. 65 PRESS 1-2 SYNCHRO
1 - SUITABLE SIZE PIPE TOOL
2 - SYNCHRO RING
3 - SPECIAL TOOL 6310–1
4 - 1–2 SYNCHRO ASSEMBLY
5 - PRESS RAM
2001 JEEP WRANGLER
(17) Install interm ring.
(18) Install new 1-2 synchro hub snap ring (Fig.
66) and verfiy the snap ring is seated.
NOTE: Snap rings are available in thicknesses from
1.80 mm to 2.00 mm (0.070 to 0.078 in.). Install
thickest snap ring that will fit in shaft groove.
1 - 1-2 SYNCHRO
2 - SPECIAL TOOL
3 - SYNCHRO SNAP RING
(19) Install second gear synchro ring in 1-2 syn-
chro hub and sleeve (Fig. 67). Verify synchro ring is
properly seated.
(20) Install synchro friction cone and synchro cone
in synchro ring.

1 - SECOND GEAR SYNCHRO RING

2 - 1-2 SYNCHRO
3 - SPECIAL TOOL
Fig. 66 1-2 SYNCHRO HUB SNAP RING
Fig. 67 SECOND GEAR SYNCHRO RING
TJ