Sound Bar Remove/Install - Jeep Wrangler 2001 Service Manual

8As - 6 AUDIO
SOUND BAR (Continued)
(6) Unplug the sound bar wire harness connector.
(7) Lift each outboard end flap of the sound bar
cover over the top of the sport bar far enough to
access the mounting screws (Fig. 8).
(8) Remove the two screws that secure each end of
the sound bar to the sport bar.
(9) Lift the sound bar up off of the sport bar to
remove it from the vehicle.
INSTALLATION
(1) Position the sound bar onto the sport bar.
(2) Install the two screws retaining the sound bar
to the sport bar.
(3) Connect the sound bar wire harness connector.
(4) Position the sound bar trim cover and attach
the hook and loop.
(5) If the vehicle is equipped with the standard
soft top, raise the soft top.
(6) If the vehicle is equipped with the optional
hard top, install the hard top (Refer to 23 - BODY/
REMOVEABLE TOP/TOP - INSTALLATION).
(7) Connect the battery negative cable.
2001 JEEP WRANGLER
1 - SOUND BAR
2 - SPORT BAR
Fig. 8 Sound Bar Remove/Install
TJ