Bin Setup Menu; Reports Menu - Lexmark X940E User Manual

Understanding printer menus

Bin Setup menu

Menu Item
Output Bin
Standard Bin
Bin 1
Bin 2
Configure Bins
Mailbox
Link
Link Optional
Type Assignment
Assign Type/Bins
Plain Paper Bin
Card Stock Bin
Transparency Bin
Glossy Bin
Labels Bin
Bond Bin
Letterhead Bin
Preprinted Bin
Colored Bin
Custom <x> Bin

Reports menu

Reports menu
Menu item
Menu Settings Page
<none>
Description
Identifies installed output bins
Note: Standard Bin is the factory default setting.
Specifies configuration options for output bins
Notes:
•
•
•
•
•
•
Selects an output bin for each supported paper type
Available selections for each type are:
Notes:
•
•
Description
Prints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the control panel language, the
TCP/IP address, the status of supplies, the status of the network connection, and
other information
Note: The page prints when this item is selected.
Mailbox is the factory default setting.
The booklet‑maker bin (Bin 2) cannot be linked to
another bin. Bin 2 folds all print jobs.
The Mailbox setting treats each bin as a separate
mailbox.
The Link setting links together all available output
bins.
The Link Optional setting links together all available
output bins except the standard bin.
The Type Assignment setting assigns each paper type
to an output bin.
Disabled
Standard Bin
Bin 1
Disabled is the factory default setting.
The factory default setting will change to Standard
Bin if the Configure Bins menu is set to Type
Assignment. Then, all print jobs will be sent to the
standard exit bin until you reassign paper types to
different bins by using the Assign Type/Bins menu.
136