Job Takes Longer Than Expected To Print; Job Prints From The Wrong Tray Or On The Wrong Paper; Incorrect Characters Print; Tray Linking Does Not Work - Lexmark X940E User Manual

Troubleshooting
C
HECK TO SEE IF THE PRINTER HAS RECEIVED INVALID DATA
Delete invalid jobs.

Job takes longer than expected to print

These are possible solutions. Try one or more of the following:
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the job.
C P P
HANGE THE AGE ROTECT SETTING TO
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
3
Touch Settings.
4
Touch General Settings.
5
Touch repeatedly until Print Recovery appears.
6
Touch until Off appears.
7
Touch Submit.
8
Touch .

Job prints from the wrong tray or on the wrong paper

C P T
HECK THE APER YPE SETTING
Make sure the Paper Type setting matches the paper loaded in the tray.

Incorrect characters print

Cause
Printer is in Hex Trace
mode.

Tray linking does not work

A
RE THE SAME SIZE AND TYPE OF PAPER LOADED IN EACH TRAY
•
Load the same size and type of paper in each tray.
• Move the paper guides to the correct positions for the paper size loaded in each tray.
O
FF
.
Solution
If Ready Hex appears on the display, you must exit Hex Trace mode before you can print your
job. Turn the printer off and back on to exit Hex Trace mode.
?
240