Large Jobs Do Not Collate; Unexpected Page Breaks Occur - Lexmark X940E User Manual

Troubleshooting
A P S
RE THE APER IZE AND
• Print a menu settings page and compare the settings for each tray.
•
If necessary, adjust the settings from the Paper Size/Type menu.
Note: The multipurpose feeder does not automatically sense the paper size. You must set the size from the Paper
Size/Type menu.

Large jobs do not collate

These are possible solutions. Try one or more of the following:
M C
AKE SURE OLLATE IS SET TO
From the Finishing menu or Print Properties, set Collate to On.
Note: Setting Collate to Off in the software overrides the setting in the Finishing menu.
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of
images, and the number of pages in the job.
M
AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory or an optional hard disk.

Unexpected page breaks occur

Increase the Print Timeout value:
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
3
Touch Settings.
4
Touch General Settings.
5
Touch repeatedly until Timeouts appears.
6
Touch Timeouts.
7
Touch the next to Print Timeout repeatedly until the desired value appears.
8
Touch Submit.
9
Touch .
P T
APER YPE SETTINGS THE SAME FOR EACH TRAY
O
N
.
?
241