E-Mail Server Setup Menu - Lexmark X940E User Manual

Understanding printer menus
Menu item
IPv6
Enable DHCPv6
Yes
No
E‑mail Server Setup menu
Use the following menu to configure the SMTP e‑mail server.
Menu item
E‑mail Server Setup
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
E‑mail Server Setup
SMTP Timeout
5–30
E‑mail Server Setup
SMTP Server Authentication
Off
Device Userid and password
User ID and password
User e‑mail and password
E‑mail Server Setup
Device Userid
Password
Reply Address
Subject
Message
E‑mail Server Setup
Send me a copy
Never appears
On by default
Off by default
Always On
E‑mail Server Setup
Max e‑mail size
0–65535 kB
E‑mail Server Setup
Size Error Message
Description
Enables DHCPv6 in the printer
Note: No is the factory default setting.
Description
Specifies SMTP server port information
Note: 25 is the default SMTP gateway port.
Specifies the amount of time in seconds before the server stops trying to
send the e‑mail
Note: 30 seconds is the factory default setting.
Specifies the type of user authentication required for scan to e‑mail
privileges
Note: Off is the factory default setting.
Specifies e‑mail server information
Note: The message box has a limitation of 512 characters.
Sends a copy of the e-mail back to the creator of the e-mail
Specifies the maximum e-mail size in kilobytes
Note: E-mail above the specified size is not sent.
Sends a message when an e-mail is greater than the configured size limit
184