Quality Menu - Lexmark X940E User Manual

Understanding printer menus
Menu item
Hole Punch Mode
2 holes
3 holes
4 holes
Offset Pages
None
Between Copies
Between Jobs

Quality menu

Menu item
Print Mode
Color
Black Only
Color Correction
Auto
Off
Manual
Print Resolution
2400 IQ
Toner Darkness
1–5
Description
Specifies the number of holes punched
Notes:
•
3 is the US factory default setting. The 3 holes setting is available only for the
3‑hole finisher.
• 4 is the international factory default setting. The 4 holes setting is available
only for the 4‑hole finisher.
• This menu is available only when the finisher is installed.
Stacks copies or print jobs into staggered sets in an output bin
Notes:
•
None is the factory default setting. No pages are offset during the print job.
•
Between Copies offsets each copy of a print job.
• Between Jobs offsets each print job.
Description
Specifies whether images are printed in grayscale or in color
Note: Color is the factory default setting.
Adjusts the color output on the printed page
Notes:
•
Auto is the factory default setting. Auto applies different color conversion tables
to each object on the printed page.
• Off turns off color correction.
•
Manual allows customization of the color tables using the settings available from
the Manual Color menu.
• Due to the differences in additive and subtractive colors, certain colors that
appear on computer monitors are impossible to duplicate on the printed page.
Specifies the printed output resolution
Note: 2400 IQ is the factory default setting.
Lightens or darkens the printed output
Notes:
• 4 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
•
If Print Mode is set to Black Only, a setting of 5 increases toner density and
darkness to all print jobs.
•
If Print Mode is set to Color, a setting of 5 is the same as a setting of 4.
165