Power Consumption - Lexmark X940E User Manual

Notices
ENERGY STAR
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser
products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
nominally a 5 milliwatt gallium arsenide laser operating in the wavelength of 770-795 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.
Laser advisory label
A laser notice label may be affixed to this printer as shown:

Power consumption

Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description
Printing The product is generating hard‑copy output from electronic inputs.
Copying The product is generating hard‑copy output from hard‑copy original
documents.
Scanning The product is scanning hard‑copy documents.
Ready The product is waiting for a print job.
Power Saver The product is in energy‑saving mode.
High Off The product is plugged into a wall outlet, but the power switch is turned
off.
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is turned off,
and the product is in the lowest possible power consumption mode.
Power consumption (Watts)
850 W
850 W
240 W
220 W
45 W
NA
NA
274