Error Reading Usb Drive; Fax Failed - Lexmark X940E User Manual

Understanding printer messages 193
Dialing
A fax number is dialed. If the number is too long to fit on the screen, only the word Dialing appears. Wait for the
message to clear.
Disk Corrupted. Reformat?
The printer attempted a hard disk recovery on a corrupted hard disk, and the hard disk cannot be repaired. The hard
disk must be reformatted.
Touch Reformat disk to reformat the hard disk and clear the message.
Note: Reformatting the disk deletes all the files currently stored on the disk.
Disk recovery x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is attempting to recover the printer hard disk.
Disk recovery takes place in several phases. The percentage completed during each phase appears on the display.
Empty hole punch box
Empty the hole punch box, and then reinsert it into the finisher. Wait for the message to clear.
Encrypting disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is encrypting the printer hard disk.
The percentage completed appears on the display.
Enter PIN
Enter the PIN you created in Print Properties when the confidential job was sent for printing.
Enter PIN to lock
Enter the PIN you created to lock the control panel and prevent menu changes.

Error reading USB drive

Remove the device and wait for the message to clear. The USB drive may be corrupted.

Fax failed

The fax failed to be sent. Wait for the message to clear.