Lexmark X940E User Manual page 141

Understanding printer menus
Menu item
Timeouts
Power Saver Mode
Disabled
2–240
Timeouts
Screen Timeout
15–300
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Network Job Timeout
1–255
Print Recovery
Auto Continue
Disabled
5–255
Description
Specifies the number of minutes of inactivity before some systems
begin entering a minimum power state.
Notes:
• 60 minutes is the factory default setting.
• Power Saver does not interact with Standby Mode.
•
Changing Power Saver should not cause Standby Mode to be
changed.
Sets the amount of time in seconds the printer waits before
returning the printer display to a Ready state
Note: 30 seconds is the factory default setting.
Sets the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the remainder of the print job
Notes:
• 90 seconds is the factory default setting.
•
When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
• Print Timeout is available only when using PCL or PPDS
emulation. This setting has no effect on PostScript emulation
print jobs.
Sets the amount of time in seconds the printer waits for additional
data before canceling a print job
Notes:
•
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL or
PPDS emulation print jobs.
Sets the amount of time in seconds that a network print job can
take before it is canceled
Notes:
•
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
• If a value of 1–9 is selected, the setting will be saved as 10.
Lets the printer automatically continue printing from certain offline
situations when not resolved within the specified time period
Notes:
•
Disabled is the factory default setting.
•
5–255 is a range of time in seconds.
141