Darkness; Color; Photo; Sides (Duplex) - Lexmark X940E User Manual

Copying 64

Darkness

This option adjusts how light or dark your copies will turn out in relation to the original document.

Color

Touching the Color button tells the printer to copy the original document in color.

Photo

Touching the Photo button tells the printer to pay extra attention to shading or tones.
Note: To copy a color image, make sure the color button is also selected.

Sides (Duplex)

Use this option to select duplex settings. You can print copies on one or two sides, make two-sided copies (duplex) of
two-sided original documents, make two-sided copies from one-sided original documents, or make one-sided copies
(simplex) from two-sided original documents.
Note: For two-sided output, you must have a duplex unit attached to the printer.

Collate

This option keeps the pages of a print job stacked in sequence when printing multiple copies of the document. The
factory default setting for Collate is on; the output pages of your copies will be ordered (1,2,3) (1,2,3) (1,2,3). If you
want all the copies of each page to remain together, turn Collate off, and your copies will be ordered (1,1,1) (2,2,2)
(3,3,3).

Options

Touching the Options button opens a screen where you can change Paper Saver, Advanced Imaging, Separator Sheets,
Margin Shift, Edge Erase, Date/Time Stamp, Overlay, Content, and Advanced Duplex settings.
Paper Saver
This option lets you print two or more sheets of an original document together on the same page. Paper Saver is also
called N-up printing. The N stands for Number. For example, 2-up would print two pages of your document on a single
page, and 4-up would print four pages of your document on a single page. Touching Print Page Borders adds or removes
the outline border surrounding the original document pages on the output page.
Create Booklet
This option creates a sequence of collated output that, when folded or folded and stapled, forms a booklet half the
page size of the original document and with all the pages in order.
Note: To use Create Booklet, you must have a duplex unit attached to the printer.