Bin Setup Menu - Lexmark 19Z0202 - X 864dhe 4 B/W Laser User Manual

Menu item
Portrait Width
3–17 inches
76–432 mm
Portrait Height
3–17 inches
76–432 mm
Feed Direction
Short Edge
Long Edge

Bin Setup menu

Menu Item
Output Bin
Standard Bin
Bin <x>
Configure Bins
Mailbox
Link
Link Optional
Type Assignment
Description
Sets the portrait width
Notes:
•
If the width exceeds the maximum, the printer uses the maximum
width allowed.
•
11.69 inches is the US factory default setting. Inches can be increased
in 0.01-inch increments.
•
297 mm is the international factory default setting. Millimeters can be
increased in 1-mm increments.
Sets the portrait height
Notes:
•
If the height exceeds the maximum, the printer uses the maximum
height allowed.
•
17 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
•
432 mm is the international factory default setting. Millimeters can be
increased in 1-mm increments.
Specifies the feed direction if the paper can be loaded in either direction
Notes:
•
Short Edge is the factory default setting.
• Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Description
Specifies the default output bin
Note: Standard Bin is the factory default setting.
Specifies configuration options for output bins
Notes:
• Mailbox is the factory default setting.
• Bins assigned the same name are automatically linked
unless Link Optional is selected.
•
The Mailbox setting treats each bin as a separate
mailbox.
•
The Link setting links together all available output bins.
•
The Link Optional setting links together all available
output bins except the standard bin and appears only
when at least two optional bins are installed.
• The Type Assignment setting assigns each paper type
to an output bin or linked bin set.
Understanding printer menus
139