Utilities Menu - Lexmark X940E User Manual

Understanding printer menus

Utilities menu

Menu item
Factory Defaults
Do Not Restore
Restore Now
Format Disk
Yes
No
Job Acct Stat
Print
Clear
Activate Hex Trace
<none>
Coverage Estimator
Off
On
Description
Returns the printer settings to the factory default settings
Notes:
•
Do Not Restore is the factory default setting. Do Not Restore keeps the
user‑defined settings.
•
All printer settings are returned to factory default settings except Display
Language and the settings in the Parallel menu, Serial menu, Network menu,
and USB menu.
•
All downloads stored in RAM are deleted. Downloads stored in flash memory
or on the printer hard disk are not affected.
Formats the printer hard disk
Notes:
•
A printer hard disk must be installed in the printer and operating properly for
this menu item to be available. The disk must not be Read/Write or Write
protected.
• No cancels the format request.
• Selecting Yes deletes all stored data and reformats the printer hard disk.
Prints a list of all stored job statistics or deletes the information from the printer hard
disk
Notes:
•
A printer hard disk must be installed in the printer and operating properly for
this menu item to be available.
•
Selecting Print prints a list of statistics.
•
Clear deletes all job statistics stored on the printer hard disk. Clearing
job account statistics appears on the display.
•
The Clear selection will not appear if Job Accounting is set to MarkTrack
Assists in isolating the source of a print job problem
Notes:
•
When Hex Trace is activated, all data sent to the printer is printed in
hexadecimal and character representation and control codes are not
executed.
• To exit Hex Trace, turn the printer off, or reset the printer.
Provides an estimate of the percentage coverage of cyan, magenta, yellow, and black
on a page. The estimate is printed on a separator page.
Note: Off is the factory default setting.
168
TM
.