Standard Usb Port Disabled; Too Many Disks Installed - Lexmark X940E User Manual

Understanding printer messages
55 Unsupported option in slot <x>
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the unsupported optional interface card or internal print server from the printer system board.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
56 Parallel port <x> disabled
•
Touch Continue to clear the message.
The printer discards any data received through the parallel port.
•
Make sure the Parallel Buffer menu item is not set to Disabled.
56 Serial port <x> disabled
• Touch Continue to clear the message.
The printer discards any data received through the serial port.
•
Make sure the Serial Buffer menu item is not set to Disabled.

56 Standard USB port disabled

• Touch Continue to clear the message.
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu item is not set to Disabled.
56 USB port <x> disabled
• Touch Continue to clear the message.
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu item is not set to Disabled.
57 Configuration change, held jobs were not restored
Touch Continue to clear the message.

58 Too many disks installed

1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the extra disks.
204