Lexmark X940E User Manual page 143

Understanding printer menus
Menu item
Color
On
Off
Allow Color copies
On
Off
Duplex
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Print Page Borders
On
Off
Collate
On
Off
Punch
On
Off
Staple
On
Off
Description
Specifies whether a copy job is printed in color
Enables color copying
Specifies whether an original document is duplex (two‑sided) or simplex (one-sided),
and then specifies whether the copy should be duplex or simplex
Notes:
• 1 sided to 1 sided—The original page has printing on one side. The copied
page will have printing on one side.
•
1 sided to 2 sided—The original page has printing on one side. The copied
page will have printing on both sides. For example, if the original is six sheets,
the copy is three sheets with printing on both sides.
•
2 sided to 1 sided—The original page has printing on both sides. The copied
page will have printing on only one side. For example, if the original draft is
three sheets of paper with an image on each side of each sheet, then the copy
is six sheets with only one image on one side of each sheet.
•
2 sided to 2 sided—The original page has printing on both sides. The copy
mimics the original exactly.
Specifies if a border is printed around the edge of the page at the margins
Note: On is the factory default setting.
Keeps the pages of a print job stacked in sequence when making multiple copies of
the job
Note: On is the factory default setting.
Enables hole punching
Note: On is the factory default setting.
Enables stapling
Note: On is the factory default setting.
143