Understanding printer menus
Menu item
Multipage Print
Off
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
Multipage Order
Horizontal
Vertical
Reverse Horizontal
Reverse Vertical
Multipage View
Auto
Long Edge
Short Edge
Multipage Border
None
Solid
Staple Job
Off
Auto
Front
Back
2 Staples
4 Staples
Hole Punch
On
Off
Description
Specifies that multiple‑page images be printed on one side of a sheet of paper.
This is also referred to as N‑up or Paper Saver.
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Specifies the positioning of multiple‑page images when using Multipage Print
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of images and whether the images are in
portrait or landscape orientation.
Specifies the orientation of a multiple‑page sheet
Notes:
•
Auto is the factory default setting. The printer chooses between portrait and
landscape.
•
Long Edge uses landscape.
•
Short Edge uses portrait.
Prints a border around each page image when using Multipage Print
Note: None is the factory default setting.
Specifies the number and position of staples on a print job
Notes:
•
This menu is available only when the finisher is installed.
•
Off is the factory default setting. Print jobs are not stapled.
•
Auto corner staples every print job.
•
Envelopes are not stapled.
Specifies whether a print job receives hole‑punch finishing
Notes:
•
This menu is available only when the finisher is installed.
•
Off is the factory default setting. Print jobs are not hole punched.
•
The On setting instructs the finisher to hole punch every print job.
164