Finishing Modes - Canon CLC5151 Reference Manual

Finishing Modes

The Finisher-X1 is equipped with the following finishing modes.
IMPORTANT
The following types of paper are output to the centre output tray of the main unit and not to the Output
Tray of the finisher:
- 320 mm x 450 mm (SRA3) paper, envelopes, transparencies, labels, tracing paper, tab paper, glossy
paper, and Washi (Japanese paper).
NOTE
If the Collate or Group mode is set, the output tray moves downward as the stack of paper that is output
increases in quantity and thickness. Once the output tray has reached its stacking limit, printing stops
temporarily. Remove all of the prints from the output tray, and printing resumes.
Collate Mode
The prints are automatically collated into sets arranged in page order. The collated print sets can be
shifted by pressing [Offset].
Group Mode
All prints of the same original page are grouped together. The grouped print sets can be shifted by
pressing [Offset].
Offset Mode
The print output is shifted alternately to the front and back of the tray, in a vertical (portrait) orientation, or
a horizontal (landscape) orientation depending on the orientation of your originals.
NOTE
If you press [Offset] when either the Collate or Group mode is set, each set of prints is shifted before it is
delivered to the output tray.
3-19
Finisher-X1
3