Standard Output Tray Is Full, Unload Paper - Xerox Phaser 4500 Service Manual

Error Messages and Codes

Standard Output Tray Is Full, Unload Paper

3-70
Error Indication
Standard Output Tray Is Full, Unload Paper
Troubleshooting Reference
Applicable Parts
Output tray full sensor
Stack full actuator
HVPS/engine logic board
Troubleshooting Procedure
Steps Actions and Questions
1 Manually operate the stack full
actuator.
Does the stack full actuator move
smoothly?
2 Enter Service Diagnostics, and from
the
Output Tray Full Sensor
Is the position of the sensor actuator
correctly reported when it is
manually actuated?
Wiring and Plug/Jack Map References
"Stacker Signal Diagram" on page 10-37
"Stacker General Wiring Diagram" on
page 10-36
"Stacker Plug/Jack Locator" on page 10-16
menu select the
Sensor Tests
test.
Yes No
Go to step 2. Replace the
stack full
actuator.
Replace the Go to "Output
HVPS/engine Tray Full
logic board Sensor" on
(page 8-73). page 4-23.
Phaser 4500/4510 Service Manual