FRU Disassembly
Output Tray Full Sensor
8-52
(PL10.1.26)
J290
1. Output tray full sensor
Procedure:
1.
Remove the paper exit assembly (page 8-49).
2.
Remove the upper exit chute (page 8-50).
3.
Unplug J290 from P290 on the output tray full sensor.
4.
Release the hooks of the output tray full sensor, and remove the sensor
from the lower exit chute.
P290
2
1
2. Lower exit chute
Phaser 4500/4510 Service Manual
s4500-133