Feed Clutch Assembly - Xerox Phaser 4500 Service Manual

Feed Clutch Assembly

Phaser 4500/4510 Service Manual
(PL20.2.21)
1. Out chute
2. Feed clutch assembly
Procedure:
1. Remove the optional 550-sheet paper feeder (page 8-78).
2. Remove the six screws (tapping, 8 mm) that attach the tie plate.
3. Remove the tie plate from the out chute.
Note
The connector in the following step has a gender adapter that could
stay with either side of the harness.
4. Disconnect the connector (P/J853) of the feed clutch assembly from the
clutch sensor 1 assembly harness.
5. Remove the E-ring that secures the feed clutch assembly, and remove the
feed clutch assembly from the feed shaft.
Replacement Note:
The connectors for the feed clutch assembly and the turn roller clutch are
identical. Be careful to plug in the correct connector.
1
P/J853
3. Tie plate
FRU Disassembly
2
3
s4500-165
8-91