Low Voltage Power Supply (Lvps) (P4510) - Xerox Phaser 4500 Service Manual

Hide thumbs Also See for Phaser 4500:

Table of Contents

FRU Disassembly

Low Voltage Power Supply (LVPS) (P4510)

1. Exit motor PWBA

Remove the front cover (page 8-11).

Remove the LVPS shield plate (page 8-60).

Do not attempt to unplug the cable from J101 on the LVPS. This is a

soldered connection and attempts to disconnect the wire will damage

the circuit board.

Phaser 4500/4510 Service Manual