Resetting Paper Handling Setup Values
Resetting PostScript Setup Values
Resetting PCL Setup Values
Resetting General Setup Values
Phaser 4500/4510 Service Manual
Resetting the Paper Handling Setup values resets the default paper source, 2-
sided printing, tray setup (default paper type/size), Load Paper Timeout, tray
sequence, tray prompt, custom size paper units, default paper destination, job
offset, output tray switch, fuser temperature configuration, and reprint jammed
pages settings.
1.
From the Main Menu, select
button.
2.
Select
Reset Paper Handling
3.
Select
Reset Paper Handling Setup
Resetting the PostScript Setup values resets the PostScript Error Info, Image
Smoothing, and Edge-to-Edge Printing settings.
1.
From the Main Menu, select
2.
Select
Reset PostScript
3.
Select
Reset PostScript Setup
Resetting the PCL Setup values resets the default font number, pitch, point
size, symbol set, orientation, form length, line termination character, and
Edge-to-Edge Printing settings.
1.
From the Main Menu, select
2.
Select
Reset PCL
Setup, then press the OK button.
3.
Select
Reset PCL Setup
Resetting the General Setup values resets the Print-Quality Mode, Print
Quantity, and Print with Low Toner settings.
1.
From the Main Menu, select
2.
Select
Reset General
3.
Select
Reset General Setup
Paper Handling
Setup, then press the OK
Setup, then press the OK button.
NOW, then press the OK button.
PostScript
Setup, then press the OK button.
Setup, then press the OK button.
NOW, then press the OK button.
PCL
Setup, then press the OK button.
NOW, then press the OK button.
General
Setup, then press the OK button.
Setup, then press the OK button.
NOW, then press the OK button.
Adjustments and Calibrations
6-11