Xerox Phaser 4500 Service Manual page 381

Phaser 4500/4510 Service Manual
P4500
1
P4510
1. Duplex unit ground wire
2. Duplex unit harness
Procedure:
1. Remove the left cover (page 8-96).
2. Remove the right cover (page 8-97).
3. Unplug J50, the duplex unit harness, from P50 on the duplex unit PWBA.
4. Remove the 6 mm machine screw to disconnect the duplex unit ground
wire.
5. Release the duplex unit harness and ground wire from the harness clamp.
6. Remove the shoulder screw that attaches the damper spring.
7. Remove the two hinge screws that secure the duplex unit lower housing,
and remove the duplex unit lower housing from the duplex unit housing
cover.
3
2
2
3. Duplex unit motor
4. Duplex unit sensor harness
FRU Disassembly
4
3
4
s4510-187
8-101